SUN HYDRAULICS
DPCBODN
$140.29 USD
- SUN HYDRAULICS
- Material:DPCBODN
- Model:DPCB-ODN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCBODN (DPCBODN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for use in moderate flow circuits. It can be utilized alone or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 exceeds the set threshold. Notably, pressure at port 3 adds directly to the valve setting, which may limit its use as a work port in some circuits; opting for a 4-port version might be more suitable in such cases. This model is not bistable and can modulate between two positions. The DPCBODN features Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. The valve fits T2A cavities and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), while the maximum operating pressure reaches up to 5000 psi (350 bar). The control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum leakage at approximately 1 in\u00b3/min (1000 psi). The adjustment mechanism allows for increased settings through clockwise turns. Installation requires specific torque values: the valve hex size is 1-1/8 inches (28.6 mm) with an installation torque of 45-50 lbf-ft (61-68 Nm), while the adjustment screw has an internal hex size of 5/32 inches (4 mm). Additionally, the locknut hex size is set at 9/16 inches (15 mm) with a torque requirement of 80-90 lbf-in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for optimal performance.
The Sun Hydraulics DPCBODN (DPCBODN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for use in moderate flow circuits. It can be utilized alone or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 exceeds the set threshold. Notably, pressure at port 3 adds directly to the valve setting, which may limit its use as a work port in some circuits; opting for a 4-port version might be more suitable in such cases. This model is not bistable and can modulate between two positions. The DPCBODN features Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. The valve fits T2A cavities and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), while the maximum operating pressure reaches up to 5000 psi (350 bar). The control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum leakage at approximately 1 in\u00b3/min (1000 psi). The adjustment mechanism allows for increased settings through clockwise turns. Installation requires specific torque values: the valve hex size is 1-1/8 inches (28.6 mm) with an installation torque of 45-50 lbf-ft (61-68 Nm), while the adjustment screw has an internal hex size of 5/32 inches (4 mm). Additionally, the locknut hex size is set at 9/16 inches (15 mm) with a torque requirement of 80-90 lbf-in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for optimal performance.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ