SUN HYDRAULICS
DPCBOWV
$146.24 USD
- SUN HYDRAULICS
- Material:DPCBOWV
- Model:DPCB-OWV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCBOWV (DPCBOWV) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the pre-set value, with pressure at port 3 directly contributing to this setting. However, due to fatigue strength limits, maximum pressure at port 3 should not exceed 3000 psi (210 bar). The DPCBOWV model is capable of modulating between two positions and is not bistable. This valve incorporates Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity/cartridge machining variations. It fits T2A cavities and belongs to series 2, offering a capacity of 15 gpm (60 L/min) with factory pressure settings established at 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min). Valve leakage is minimal, with a maximum leakage rate of just 1 in\u00b3/min at 110 SUS (24 cSt) and a pressure of 1000 psi (70 bar). The DPCBOWV model features an adjustment screw that allows for up to five clockwise turns to increase the setting, with a valve hex size of 1-1/8 inches (28.6 mm) and an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). The locknut hex size measures at 9/16 inches (15 mm), requiring a torque of approximately 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and supports Viton seal kits for optimal performance.
The Sun Hydraulics DPCBOWV (DPCBOWV) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the pre-set value, with pressure at port 3 directly contributing to this setting. However, due to fatigue strength limits, maximum pressure at port 3 should not exceed 3000 psi (210 bar). The DPCBOWV model is capable of modulating between two positions and is not bistable. This valve incorporates Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity/cartridge machining variations. It fits T2A cavities and belongs to series 2, offering a capacity of 15 gpm (60 L/min) with factory pressure settings established at 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min). Valve leakage is minimal, with a maximum leakage rate of just 1 in\u00b3/min at 110 SUS (24 cSt) and a pressure of 1000 psi (70 bar). The DPCBOWV model features an adjustment screw that allows for up to five clockwise turns to increase the setting, with a valve hex size of 1-1/8 inches (28.6 mm) and an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). The locknut hex size measures at 9/16 inches (15 mm), requiring a torque of approximately 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and supports Viton seal kits for optimal performance.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ