SUN HYDRAULICS
DPCCCBV
$151.90 USD
- SUN HYDRAULICS
- Material:DPCCCBV
- Model:DPCC-CBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCCCBV (DPCCCBV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses the pre-set threshold, with pressure at port 3 directly adding to this setting. Notably, port 3 may not be suitable as a work port; if this is a concern, considering the 4-port version could be beneficial. The DPCCCBV is interchangeable with direct-acting valves, fitting the same cavities and maintaining consistent flow paths. In terms of specifications, it features a cavity size of T2A and belongs to series 2 with a capacity of up to 15 gpm (60 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while the control pilot flow ranges between 10 - 15 in\u00b3/min (0.16 - 0.25 L/min). The valve's maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min per 1000 psi (15 cc/min per 70 bar). Adjustment settings can be increased with up to five clockwise turns, and installation requires a torque of between 45 - 50 lbf ft (61 - 68 Nm). This valve incorporates Sun's floating style construction to reduce the risk of internal part binding due to excessive installation torque or machining variations within the cavity/cartridge. It also offers modulation capabilities between two positions but is not bistable. For applications where pilot flow might exceed valve settings, users should consider performance curves for pilot consumption versus load pressure above the valve setting or opt for the direct-acting version as an alternative solution.
The Sun Hydraulics DPCCCBV (DPCCCBV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses the pre-set threshold, with pressure at port 3 directly adding to this setting. Notably, port 3 may not be suitable as a work port; if this is a concern, considering the 4-port version could be beneficial. The DPCCCBV is interchangeable with direct-acting valves, fitting the same cavities and maintaining consistent flow paths. In terms of specifications, it features a cavity size of T2A and belongs to series 2 with a capacity of up to 15 gpm (60 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while the control pilot flow ranges between 10 - 15 in\u00b3/min (0.16 - 0.25 L/min). The valve's maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min per 1000 psi (15 cc/min per 70 bar). Adjustment settings can be increased with up to five clockwise turns, and installation requires a torque of between 45 - 50 lbf ft (61 - 68 Nm). This valve incorporates Sun's floating style construction to reduce the risk of internal part binding due to excessive installation torque or machining variations within the cavity/cartridge. It also offers modulation capabilities between two positions but is not bistable. For applications where pilot flow might exceed valve settings, users should consider performance curves for pilot consumption versus load pressure above the valve setting or opt for the direct-acting version as an alternative solution.
Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ