SUN HYDRAULICS
DPCCKCN
$152.89 USD
- SUN HYDRAULICS
- Material:DPCCKCN
- Model:DPCC-KCN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCCKCN (Material Number: DPCCKCN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set value. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its usability as a work port in certain circuits. If this poses an issue, a four-port version of this valve may be more suitable. The DPCCKCN model is interchangeable with direct-acting versions, sharing identical cavities and flow paths. Port 3 can be blocked to prevent shifting, and while the valve is not bistable, it can modulate between two positions. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations rather than hydraulic operating limits. When the pilot pressure exceeds the valve setting, pilot flow becomes a consideration; if problematic, switching to a direct-acting version might be beneficial. This cartridge incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T2A and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), and maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The adjustment requires approximately five clockwise turns for increased settings, and installation torque ranges from 45-50 lbf ft (61-68 Nm).
The Sun Hydraulics DPCCKCN (Material Number: DPCCKCN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set value. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its usability as a work port in certain circuits. If this poses an issue, a four-port version of this valve may be more suitable. The DPCCKCN model is interchangeable with direct-acting versions, sharing identical cavities and flow paths. Port 3 can be blocked to prevent shifting, and while the valve is not bistable, it can modulate between two positions. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations rather than hydraulic operating limits. When the pilot pressure exceeds the valve setting, pilot flow becomes a consideration; if problematic, switching to a direct-acting version might be beneficial. This cartridge incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T2A and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), and maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The adjustment requires approximately five clockwise turns for increased settings, and installation torque ranges from 45-50 lbf ft (61-68 Nm).
Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ