SUN HYDRAULICS
DPCCLAN
$136.02 USD
- SUN HYDRAULICS
- Material:DPCCLAN
- Model:DPCC-LAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCCLAN (DPCCLAN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. It shifts based on the pressure differential between port 1 and port 3, with pressure at port 3 directly influencing the valve setting. Due to this characteristic, port 3 may not be suitable as a work port in certain circuits; a four-port version of this valve might be necessary in such cases. The DPCCLAN is not bistable but can modulate between two positions. It is interchangeable with direct-acting versions, sharing the same cavity and flow paths. Users should limit maximum pressure at port 3 to 3000 psi (210 bar) due to fatigue strength limitations. The valve incorporates Sun's floating style construction to minimize internal part binding from excessive installation torque or machining variations. With a capacity of 15 gpm (60 L/min), the valve operates at a maximum pressure of 5000 psi (350 bar). Factory pressure settings are established at 4 gpm (15 L/min). Control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum leakage at 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). Adjustments can increase settings with up to five full clockwise turns, utilizing an internal hex size of 5/32 inches (4 mm) for the adjustment screw and a locknut hex size of 9/16 inches (15 mm). Installation requires torque between 45-50 lbf ft (61-68 Nm), and the locknut should be torqued to 80-90 lbf in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for cartridge applications.
The Sun Hydraulics DPCCLAN (DPCCLAN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. It shifts based on the pressure differential between port 1 and port 3, with pressure at port 3 directly influencing the valve setting. Due to this characteristic, port 3 may not be suitable as a work port in certain circuits; a four-port version of this valve might be necessary in such cases. The DPCCLAN is not bistable but can modulate between two positions. It is interchangeable with direct-acting versions, sharing the same cavity and flow paths. Users should limit maximum pressure at port 3 to 3000 psi (210 bar) due to fatigue strength limitations. The valve incorporates Sun's floating style construction to minimize internal part binding from excessive installation torque or machining variations. With a capacity of 15 gpm (60 L/min), the valve operates at a maximum pressure of 5000 psi (350 bar). Factory pressure settings are established at 4 gpm (15 L/min). Control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum leakage at 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). Adjustments can increase settings with up to five full clockwise turns, utilizing an internal hex size of 5/32 inches (4 mm) for the adjustment screw and a locknut hex size of 9/16 inches (15 mm). Installation requires torque between 45-50 lbf ft (61-68 Nm), and the locknut should be torqued to 80-90 lbf in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for cartridge applications.
Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ