SUN HYDRAULICS
DPCCODV
$161.82 USD
- SUN HYDRAULICS
- Material:DPCCODV
- Model:DPCC-ODV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCCODV (DPCCODV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It operates by blocking one port while allowing flow between the other two, making it suitable for use either independently or to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds its set value, with pressure at port 3 being directly additive to the valve's setting. Consequently, port 3 may not be used as a work port unless a four-port version is selected. This model is not bistable but can modulate between positions. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of 15 gpm (60 L/min), it fits into T2A cavities and maintains interchangeability with direct-acting versions. The valve features Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. Important specifications include a control pilot flow of 10\u201315 in\u00b3/min (0.16\u20130.25 L/min), maximum leakage of 1 in\u00b3/min at 110 SUS (24 cSt), and an installation torque requirement of 45\u201350 lbf ft (61\u201368 Nm). The adjustment screw requires a hex size of 5/32 in., with an adjustment range covering up to five clockwise turns for setting increases. The DPCCODV also incorporates Viton seals, enhancing its durability and performance under various conditions.
The Sun Hydraulics DPCCODV (DPCCODV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It operates by blocking one port while allowing flow between the other two, making it suitable for use either independently or to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds its set value, with pressure at port 3 being directly additive to the valve's setting. Consequently, port 3 may not be used as a work port unless a four-port version is selected. This model is not bistable but can modulate between positions. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of 15 gpm (60 L/min), it fits into T2A cavities and maintains interchangeability with direct-acting versions. The valve features Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. Important specifications include a control pilot flow of 10\u201315 in\u00b3/min (0.16\u20130.25 L/min), maximum leakage of 1 in\u00b3/min at 110 SUS (24 cSt), and an installation torque requirement of 45\u201350 lbf ft (61\u201368 Nm). The adjustment screw requires a hex size of 5/32 in., with an adjustment range covering up to five clockwise turns for setting increases. The DPCCODV also incorporates Viton seals, enhancing its durability and performance under various conditions.
Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ