SUN HYDRAULICS
DPCDLAN
$139.00 USD
- SUN HYDRAULICS
- Material:DPCDLAN
- Model:DPCD-LAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCDLAN (DPCDLAN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It is engineered to be used independently or to actuate larger pilot-operated directional or logic cartridges. This valve shifts when the pressure differential between port 1 and port 3 surpasses its set threshold, with pressure at port 3 directly adding to the valve setting. However, port 3 may not be suitable as a work port due to this characteristic, suggesting that a 4-port version might be more appropriate if this poses an issue. The DPCDLAN model is interchangeable with direct-acting versions, sharing the same cavities and flow paths. Port 3 can also be blocked to prevent shifting. This non-bistable valve can modulate between two positions and should have a maximum pressure at port 3 limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. When pilot pressure surpasses the valve setting, pilot flow could become significant; thus, considering performance curves for pilot consumption versus load pressure above the setting is recommended. The direct-acting version may offer a solution if pilot flow becomes problematic. The DPCDLAN incorporates Sun's floating style construction, minimizing internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T2A and belongs to series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), and maximum valve leakage is specified at 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar).
The Sun Hydraulics DPCDLAN (DPCDLAN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It is engineered to be used independently or to actuate larger pilot-operated directional or logic cartridges. This valve shifts when the pressure differential between port 1 and port 3 surpasses its set threshold, with pressure at port 3 directly adding to the valve setting. However, port 3 may not be suitable as a work port due to this characteristic, suggesting that a 4-port version might be more appropriate if this poses an issue. The DPCDLAN model is interchangeable with direct-acting versions, sharing the same cavities and flow paths. Port 3 can also be blocked to prevent shifting. This non-bistable valve can modulate between two positions and should have a maximum pressure at port 3 limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. When pilot pressure surpasses the valve setting, pilot flow could become significant; thus, considering performance curves for pilot consumption versus load pressure above the setting is recommended. The direct-acting version may offer a solution if pilot flow becomes problematic. The DPCDLAN incorporates Sun's floating style construction, minimizing internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T2A and belongs to series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), and maximum valve leakage is specified at 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar).
Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ