SUN HYDRAULICS
DPCMKAN
$176.32 USD
- SUN HYDRAULICS
- Material:DPCMKAN
- Model:DPCM-KAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCMKAN (DPCMKAN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It is versatile and can be utilized independently or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 surpasses the preset setting. Port 4 can be blocked to prevent this shift, while port 3 serves as a work port, with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength constraints. The valve incorporates Sun's floating style construction to minimize internal binding risks from excessive installation torque or machining variations. The DPCMKAN fits the T-22A cavity and belongs to Series 2, with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), and it supports a maximum operating pressure of up to 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum valve leakage at 110 SUS (24 cSt) being limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Adjustment of the setting requires up to five clockwise turns, utilizing an internal hex size of 5/32 inches (4 mm), with locknut torque ranging from 80-90 lbf\u00b7in (9-10 Nm). The cartridge weighs approximately .60 lb (0.30 kg) and comes with a Viton seal kit for reliable sealing performance. This valve is not bistable but can modulate between two positions as needed, making it suitable for various hydraulic applications requiring precise control over fluid direction and flow rates.
The Sun Hydraulics DPCMKAN (DPCMKAN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It is versatile and can be utilized independently or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 surpasses the preset setting. Port 4 can be blocked to prevent this shift, while port 3 serves as a work port, with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength constraints. The valve incorporates Sun's floating style construction to minimize internal binding risks from excessive installation torque or machining variations. The DPCMKAN fits the T-22A cavity and belongs to Series 2, with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), and it supports a maximum operating pressure of up to 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (0.16-0.25 L/min), with maximum valve leakage at 110 SUS (24 cSt) being limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Adjustment of the setting requires up to five clockwise turns, utilizing an internal hex size of 5/32 inches (4 mm), with locknut torque ranging from 80-90 lbf\u00b7in (9-10 Nm). The cartridge weighs approximately .60 lb (0.30 kg) and comes with a Viton seal kit for reliable sealing performance. This valve is not bistable but can modulate between two positions as needed, making it suitable for various hydraulic applications requiring precise control over fluid direction and flow rates.
Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 4 can be blocked to prevent the valve from shifting.
- Port 3 can be used as a work port.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-22A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-022-006 |
Show FAQ