SUN HYDRAULICS
DRBACAN
$104.94 USD
- SUN HYDRAULICS
- Material:DRBACAN
- Model:DRBA-CAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBACAN is a normally open, direct-acting, 2-way directional cartridge valve designed for use in moderate flow circuits. It can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 exceeds the set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; in such cases, a 4-port version might be more suitable. This direct-acting design ensures low internal leakage and minimal pilot flow consumption. Furthermore, direct-acting and pilot-operated versions are interchangeable, sharing cavity fittings and flow paths. This valve is not bistable but can modulate between two positions as shown. It incorporates Sun's floating style construction to minimize binding risks due to excessive torque or machining variations. The DRBACAN fits within a T-11A cavity and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Maximum valve leakage is specified at 2 in\u00b3/min (30 cc/min) at 110 SUS (24 cSt). Adjustments can be made via an internal hex adjustment screw, with an increase in setting achieved through approximately five clockwise turns. Installation requires specific torque values: the valve hex size measures 7/8 inch (22.2 mm) with an installation torque of 30-35 lbf ft (41-47 Nm), while the locknut hex size is 9/16 inch (15 mm) requiring a locknut torque of 80-90 lbf in (9-10 Nm). The model weighs .60 lb (.30 kg) and uses Viton seal kits for optimal performance.
The Sun Hydraulics DRBACAN is a normally open, direct-acting, 2-way directional cartridge valve designed for use in moderate flow circuits. It can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 exceeds the set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; in such cases, a 4-port version might be more suitable. This direct-acting design ensures low internal leakage and minimal pilot flow consumption. Furthermore, direct-acting and pilot-operated versions are interchangeable, sharing cavity fittings and flow paths. This valve is not bistable but can modulate between two positions as shown. It incorporates Sun's floating style construction to minimize binding risks due to excessive torque or machining variations. The DRBACAN fits within a T-11A cavity and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Maximum valve leakage is specified at 2 in\u00b3/min (30 cc/min) at 110 SUS (24 cSt). Adjustments can be made via an internal hex adjustment screw, with an increase in setting achieved through approximately five clockwise turns. Installation requires specific torque values: the valve hex size measures 7/8 inch (22.2 mm) with an installation torque of 30-35 lbf ft (41-47 Nm), while the locknut hex size is 9/16 inch (15 mm) requiring a locknut torque of 80-90 lbf in (9-10 Nm). The model weighs .60 lb (.30 kg) and uses Viton seal kits for optimal performance.
Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ