SUN HYDRAULICS
DRBACEV
$114.87 USD
- SUN HYDRAULICS
- Material:DRBACEV
- Model:DRBA-CEV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBACEV (DRBACEV) is a normally open, direct-acting, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can operate independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 surpasses its set threshold, with pressure at port 3 being directly additive to the valve setting. It is important to note that due to this characteristic, port 3 may not be suitable as a work port in some circuits; in such cases, a 4-port version might be more appropriate. Featuring low internal leakage and minimal pilot flow consumption due to its direct-acting design, this valve is interchangeable with pilot-operated versions, fitting the same cavities and maintaining identical flow paths. The DRBACEV valve is capable of modulating between two positions but is not bistable. It incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations in cavity-cartridge setups. The valve fits into a T-11A cavity and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). The maximum valve leakage at 110 SUS (24 cSt) is limited to 2 in\u00b3/min (30 cc/min). For adjustments, it requires up to five clockwise turns to increase the setting. Installation specifications include a hex size of 7/8 inch (22.2 mm) for the valve and an installation torque range of 30-35 lbf ft (41-47 Nm). The adjustment screw features an internal hex size of 5/32 inch (4 mm), while the locknut has a hex size of 9/16 inch (15 mm) and requires a torque of 80-90 lbf in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for optimal performance.
The Sun Hydraulics DRBACEV (DRBACEV) is a normally open, direct-acting, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can operate independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 surpasses its set threshold, with pressure at port 3 being directly additive to the valve setting. It is important to note that due to this characteristic, port 3 may not be suitable as a work port in some circuits; in such cases, a 4-port version might be more appropriate. Featuring low internal leakage and minimal pilot flow consumption due to its direct-acting design, this valve is interchangeable with pilot-operated versions, fitting the same cavities and maintaining identical flow paths. The DRBACEV valve is capable of modulating between two positions but is not bistable. It incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations in cavity-cartridge setups. The valve fits into a T-11A cavity and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). The maximum valve leakage at 110 SUS (24 cSt) is limited to 2 in\u00b3/min (30 cc/min). For adjustments, it requires up to five clockwise turns to increase the setting. Installation specifications include a hex size of 7/8 inch (22.2 mm) for the valve and an installation torque range of 30-35 lbf ft (41-47 Nm). The adjustment screw features an internal hex size of 5/32 inch (4 mm), while the locknut has a hex size of 9/16 inch (15 mm) and requires a torque of 80-90 lbf in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for optimal performance.
Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ