SUN HYDRAULICS
DRBCCDV
$138.70 USD
- SUN HYDRAULICS
- Material:DRBCCDV
- Model:DRBC-CDV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBCCDV (Material Number: DRBCCDV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component functions as a switching device, allowing for the actuation of larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses a specified setting, with pressure at port 3 being directly additive to this setting. Due to this characteristic, port 3 may not be suitable as a work port in certain circuits, and users might consider the 4-port version if necessary. Featuring low internal leakage and minimal pilot flow consumption, these cartridges are interchangeable with both direct-acting and pilot-operated versions, sharing identical cavities and flow paths. The valve is designed with Sun's floating style construction to reduce the risk of internal part binding caused by excessive installation torque or machining variations. It is capable of modulating between two positions but is not bistable. The valve fits into a T-11A cavity and belongs to series 1, with a capacity of 7 gpm (28 L/min) and factory pressure settings established at 4 gpm (15 L/min). It can withstand a maximum operating pressure of up to 5000 psi (350 bar) while maintaining maximum valve leakage at just 2 in\u00b3/min (30 cc/min). The DRBCCDV features an adjustment screw with an internal hex size of 5/32 inch (4 mm), requiring approximately five complete clockwise turns to increase the setting. The valve hex size measures 7/8 inch (22.2 mm), with installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm). Additionally, it includes a locknut with a hex size of 9/16 inch (15 mm) that requires torque between 80 to 90 lbf in. Weighing .60 lb (.30 kg), it uses Viton seal kits for optimal performance.
The Sun Hydraulics DRBCCDV (Material Number: DRBCCDV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component functions as a switching device, allowing for the actuation of larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses a specified setting, with pressure at port 3 being directly additive to this setting. Due to this characteristic, port 3 may not be suitable as a work port in certain circuits, and users might consider the 4-port version if necessary. Featuring low internal leakage and minimal pilot flow consumption, these cartridges are interchangeable with both direct-acting and pilot-operated versions, sharing identical cavities and flow paths. The valve is designed with Sun's floating style construction to reduce the risk of internal part binding caused by excessive installation torque or machining variations. It is capable of modulating between two positions but is not bistable. The valve fits into a T-11A cavity and belongs to series 1, with a capacity of 7 gpm (28 L/min) and factory pressure settings established at 4 gpm (15 L/min). It can withstand a maximum operating pressure of up to 5000 psi (350 bar) while maintaining maximum valve leakage at just 2 in\u00b3/min (30 cc/min). The DRBCCDV features an adjustment screw with an internal hex size of 5/32 inch (4 mm), requiring approximately five complete clockwise turns to increase the setting. The valve hex size measures 7/8 inch (22.2 mm), with installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm). Additionally, it includes a locknut with a hex size of 9/16 inch (15 mm) that requires torque between 80 to 90 lbf in. Weighing .60 lb (.30 kg), it uses Viton seal kits for optimal performance.
Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ