SUN HYDRAULICS
DRBCCWV
$136.71 USD
- SUN HYDRAULICS
- Material:DRBCCWV
- Model:DRBC-CWV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBCCWV (DRBCCWV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits, offering versatility and reliability in hydraulic applications. This valve features one blocked port and an open flow path between ports 2 and 3, making it suitable for use as a standalone component or to actuate larger pilot-operated directional or logic cartridges. The DRBCCWV valve shifts when the pressure differential between port 1 and port 3 exceeds the preset value, with pressure at port 3 directly influencing this setting. However, due to this characteristic, port 3 may not be suitable as a work port in some circuits; a four-port version could provide a solution if needed. This model is known for its low internal leakage and minimal pilot flow consumption due to its direct-acting design. It can modulate between two positions but is not bistable. Its construction incorporates Sun's floating style to reduce the risk of internal parts binding from excessive installation torque or machining variations in the cavity-cartridge interface. The DRBCCWV fits cavity T-11A, belongs to Series 1, and has a capacity of 7 gpm (28 L/min). It operates at a maximum pressure of 5000 psi (350 bar) with factory pressure settings established at 4 gpm (15 L/min). The valve's maximum leakage is rated at 2 in\u00b3/min (30 cc/min) under specific conditions. The adjustment mechanism allows for fine-tuning with up to five clockwise turns to increase the setting. Installation requires specific torque values: valve hex size is .78 inches (22.2 mm), installation torque ranges from 30 to 35 lbf-ft (41 to 47 Nm), adjustment screw internal hex size is .156 inches (4 mm), locknut hex size is .5625 inches (15 mm), with locknut torque specified at 80 to 90 lbf-in (9 to 10 Nm). The model weighs .60 lb (.30 kg) and uses Viton seal kits for optimal performance.
The Sun Hydraulics DRBCCWV (DRBCCWV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits, offering versatility and reliability in hydraulic applications. This valve features one blocked port and an open flow path between ports 2 and 3, making it suitable for use as a standalone component or to actuate larger pilot-operated directional or logic cartridges. The DRBCCWV valve shifts when the pressure differential between port 1 and port 3 exceeds the preset value, with pressure at port 3 directly influencing this setting. However, due to this characteristic, port 3 may not be suitable as a work port in some circuits; a four-port version could provide a solution if needed. This model is known for its low internal leakage and minimal pilot flow consumption due to its direct-acting design. It can modulate between two positions but is not bistable. Its construction incorporates Sun's floating style to reduce the risk of internal parts binding from excessive installation torque or machining variations in the cavity-cartridge interface. The DRBCCWV fits cavity T-11A, belongs to Series 1, and has a capacity of 7 gpm (28 L/min). It operates at a maximum pressure of 5000 psi (350 bar) with factory pressure settings established at 4 gpm (15 L/min). The valve's maximum leakage is rated at 2 in\u00b3/min (30 cc/min) under specific conditions. The adjustment mechanism allows for fine-tuning with up to five clockwise turns to increase the setting. Installation requires specific torque values: valve hex size is .78 inches (22.2 mm), installation torque ranges from 30 to 35 lbf-ft (41 to 47 Nm), adjustment screw internal hex size is .156 inches (4 mm), locknut hex size is .5625 inches (15 mm), with locknut torque specified at 80 to 90 lbf-in (9 to 10 Nm). The model weighs .60 lb (.30 kg) and uses Viton seal kits for optimal performance.
Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ