SUN HYDRAULICS
DRBMCAN
$131.45 USD
- SUN HYDRAULICS
- Material:DRBMCAN
- Model:DRBM-CAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBMCAN (Material Number: DRBMCAN) is a normally open, direct-acting, 2-way directional cartridge valve designed for moderate flow circuits. It is versatile and can be used independently or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve activates when the pressure differential between port 1 and port 4 exceeds the set value. It features a bidirectional flow path between port 2 and port 3, with port 3 also serving as a work port. The design ensures low internal leakage and low pilot flow consumption, making it efficient in operation. These cartridges are interchangeable with pilot-operated versions, fitting the same cavities and maintaining identical flow paths. The pressure at port 4 directly adds to the valve setting, allowing for modulation between its two positions without being bistable. However, maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations rather than hydraulic operating limits. Constructed with Sun's floating style design, the DRBMCAN minimizes internal parts binding caused by excessive installation torque or cavity/cartridge machining variations. It fits into cavity T-21A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), while its maximum operating pressure reaches up to 5000 psi (350 bar). Maximum valve leakage is limited to 2 in\u00b3/min (30 cc/min) at viscosity of 110 SUS (24 cSt). The adjustment mechanism allows for increased settings through clockwise turns, with specific dimensions provided for installation torque and component sizes. The model weighs approximately .55 lb (.25 kg) and uses Viton seal kits for maintenance.
The Sun Hydraulics DRBMCAN (Material Number: DRBMCAN) is a normally open, direct-acting, 2-way directional cartridge valve designed for moderate flow circuits. It is versatile and can be used independently or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve activates when the pressure differential between port 1 and port 4 exceeds the set value. It features a bidirectional flow path between port 2 and port 3, with port 3 also serving as a work port. The design ensures low internal leakage and low pilot flow consumption, making it efficient in operation. These cartridges are interchangeable with pilot-operated versions, fitting the same cavities and maintaining identical flow paths. The pressure at port 4 directly adds to the valve setting, allowing for modulation between its two positions without being bistable. However, maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations rather than hydraulic operating limits. Constructed with Sun's floating style design, the DRBMCAN minimizes internal parts binding caused by excessive installation torque or cavity/cartridge machining variations. It fits into cavity T-21A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), while its maximum operating pressure reaches up to 5000 psi (350 bar). Maximum valve leakage is limited to 2 in\u00b3/min (30 cc/min) at viscosity of 110 SUS (24 cSt). The adjustment mechanism allows for increased settings through clockwise turns, with specific dimensions provided for installation torque and component sizes. The model weighs approximately .55 lb (.25 kg) and uses Viton seal kits for maintenance.
Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 3 can be used as a work port.
- The flow path between port 2 and port 3 is bidirectional.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .55 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ