SUN HYDRAULICS
DRBMLWV
$132.44 USD
- SUN HYDRAULICS
- Material:DRBMLWV
- Model:DRBM-LWV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBMLWV (Material Number: DRBMLWV) is a normally open, direct-acting, 2-way directional cartridge valve designed for use in moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. The valve transitions when the pressure differential between port 1 and port 4 surpasses the preset level, with port 3 available for use as a work port. It features a bidirectional flow path between ports 2 and 3. Thanks to its direct-acting design, the valve boasts low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions are interchangeable, fitting the same cavities and maintaining identical flow paths. The valve's pressure at port 4 directly adds to its setting, although it is not bistable and can modulate between two positions. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. It utilizes Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity-cartridge machining variations. Key specifications include a T21A cavity, series 1 capacity of 7 gpm (28 L/min), factory pressure settings established at 4 gpm (15 L/min), maximum operating pressure of 5000 psi (350 bar), and maximum valve leakage at 110 SUS (24 cSt) of 2 in\u00b3/min (30 cc/min). The adjustment requires up to five clockwise turns to increase the setting. Installation torque ranges from 30-35 lbf-ft (41-47 Nm), with an adjustment screw internal hex size of 5/32 in (4 mm) and locknut torque of 80-90 lbf-in (9-10 Nm). The model weighs .55 lb (.25 kg) and includes a Viton seal kit option.
The Sun Hydraulics DRBMLWV (Material Number: DRBMLWV) is a normally open, direct-acting, 2-way directional cartridge valve designed for use in moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. The valve transitions when the pressure differential between port 1 and port 4 surpasses the preset level, with port 3 available for use as a work port. It features a bidirectional flow path between ports 2 and 3. Thanks to its direct-acting design, the valve boasts low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions are interchangeable, fitting the same cavities and maintaining identical flow paths. The valve's pressure at port 4 directly adds to its setting, although it is not bistable and can modulate between two positions. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. It utilizes Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity-cartridge machining variations. Key specifications include a T21A cavity, series 1 capacity of 7 gpm (28 L/min), factory pressure settings established at 4 gpm (15 L/min), maximum operating pressure of 5000 psi (350 bar), and maximum valve leakage at 110 SUS (24 cSt) of 2 in\u00b3/min (30 cc/min). The adjustment requires up to five clockwise turns to increase the setting. Installation torque ranges from 30-35 lbf-ft (41-47 Nm), with an adjustment screw internal hex size of 5/32 in (4 mm) and locknut torque of 80-90 lbf-in (9-10 Nm). The model weighs .55 lb (.25 kg) and includes a Viton seal kit option.
Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 3 can be used as a work port.
- The flow path between port 2 and port 3 is bidirectional.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .55 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ