SUN HYDRAULICS
DRBPLEV
$147.93 USD
- SUN HYDRAULICS
- Material:DRBPLEV
- Model:DRBP-LEV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRBPLEV (Material Number: DRBPLEV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 4 surpasses a predetermined setting. Notably, port 3 serves as a work port, with bidirectional flow paths between ports 2 and 3, as well as ports 1 and 2. The valve's direct-acting design ensures low internal leakage and minimal pilot flow consumption, making it efficient for various applications. Additionally, the DRBPLEV features interchangeable direct-acting and pilot-operated versions that fit the same cavities and maintain identical flow paths. Pressure at port 4 directly adds to the valve's setting, allowing for modulation between two positions rather than bistable operation. The maximum pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength constraints, despite higher hydraulic operating limits being possible. The valve incorporates Sun's floating style construction to reduce internal part binding risks from excessive installation torque or cavity-cartridge machining variations. It fits into cavity T21A with a series capacity of 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). Maximum valve leakage is limited to 2 in\u00b3/min (30 cc/min) at specified conditions. Adjustments are made via an internal hex screw, requiring up to five clockwise turns to increase settings, secured by a locknut torqued between 80-90 lbf-in (9-10 Nm). The model weighs approximately .55 lb (.25 kg) and uses Viton seal kits for reliable sealing performance.
The Sun Hydraulics DRBPLEV (Material Number: DRBPLEV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 4 surpasses a predetermined setting. Notably, port 3 serves as a work port, with bidirectional flow paths between ports 2 and 3, as well as ports 1 and 2. The valve's direct-acting design ensures low internal leakage and minimal pilot flow consumption, making it efficient for various applications. Additionally, the DRBPLEV features interchangeable direct-acting and pilot-operated versions that fit the same cavities and maintain identical flow paths. Pressure at port 4 directly adds to the valve's setting, allowing for modulation between two positions rather than bistable operation. The maximum pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength constraints, despite higher hydraulic operating limits being possible. The valve incorporates Sun's floating style construction to reduce internal part binding risks from excessive installation torque or cavity-cartridge machining variations. It fits into cavity T21A with a series capacity of 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). Maximum valve leakage is limited to 2 in\u00b3/min (30 cc/min) at specified conditions. Adjustments are made via an internal hex screw, requiring up to five clockwise turns to increase settings, secured by a locknut torqued between 80-90 lbf-in (9-10 Nm). The model weighs approximately .55 lb (.25 kg) and uses Viton seal kits for reliable sealing performance.
Direct-acting, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 3 can be used as a work port.
- The flow path between port 2 and port 3 is bidirectional.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- The flow path between port 1 and port 2 is bidirectional.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .55 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ