SUN HYDRAULICS
DRCCLEN
$139.69 USD
- SUN HYDRAULICS
- Material:DRCCLEN
- Model:DRCC-LEN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRCCLEN (DRCCLEN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This valve operates with one port blocked and allows flow between the other two ports. It functions effectively either independently or as an actuator for larger pilot-operated directional or logic cartridges. The valve shifts position when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 being directly additive to this setting. This characteristic may limit the use of port 3 as a work port; in such cases, a 4-port version might be required. Thanks to its direct-acting design, this cartridge offers low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions of these valves are interchangeable, sharing cavity compatibility and flow paths. The DRCCLEN model is not bistable but can modulate between two positions. It incorporates Sun's floating style construction to reduce risks of internal part binding due to excessive installation torque or machining variations in the cavity-cartridge interface. The valve fits into a T-2A cavity, belongs to Series 2, and has a capacity of up to 15 gpm (60 L/min). Its maximum operating pressure is rated at 5000 psi (350 bar), with maximum valve leakage at low viscosity conditions being limited to 2 in\u00b3/min (30 cc/min). The adjustment mechanism requires up to five clockwise turns to increase settings, featuring an internal hex size of 5/32 inches (4 mm) for the adjustment screw and a locknut hex size of 9/16 inches (15 mm). The model weighs approximately .60 lb (.30 kg) and uses a polyurethane seal kit identified by part number 990002002.
The Sun Hydraulics DRCCLEN (DRCCLEN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This valve operates with one port blocked and allows flow between the other two ports. It functions effectively either independently or as an actuator for larger pilot-operated directional or logic cartridges. The valve shifts position when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 being directly additive to this setting. This characteristic may limit the use of port 3 as a work port; in such cases, a 4-port version might be required. Thanks to its direct-acting design, this cartridge offers low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions of these valves are interchangeable, sharing cavity compatibility and flow paths. The DRCCLEN model is not bistable but can modulate between two positions. It incorporates Sun's floating style construction to reduce risks of internal part binding due to excessive installation torque or machining variations in the cavity-cartridge interface. The valve fits into a T-2A cavity, belongs to Series 2, and has a capacity of up to 15 gpm (60 L/min). Its maximum operating pressure is rated at 5000 psi (350 bar), with maximum valve leakage at low viscosity conditions being limited to 2 in\u00b3/min (30 cc/min). The adjustment mechanism requires up to five clockwise turns to increase settings, featuring an internal hex size of 5/32 inches (4 mm) for the adjustment screw and a locknut hex size of 9/16 inches (15 mm). The model weighs approximately .60 lb (.30 kg) and uses a polyurethane seal kit identified by part number 990002002.
Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Polyurethane: 990-002-002 |
Show FAQ