SUN HYDRAULICS
DRCOCDV
$193.40 USD
- SUN HYDRAULICS
- Material:DRCOCDV
- Model:DRCO-CDV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRCOCDV (DRCOCDV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 4 surpasses its set value, with port 3 available for use as a work port. The direct-acting design ensures low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions of these valves are interchangeable, fitting the same cavities and maintaining identical flow paths. The valve setting is directly influenced by the pressure at port 4, allowing it to modulate between two positions as needed, though it is not bistable. The DRCOCDV has a cavity size of T22A and belongs to Series 2, boasting a capacity of up to 15 gpm (60 L/min). It is factory-set at a pressure established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The maximum allowable leakage at 110 SUS (24 cSt) is limited to 2 in\u00b3/min (30 cc/min). Adjustments can be made through clockwise turns, with up to five full turns available to increase settings. The valve's hex size measures 1-1/8 inches (28.6 mm), requiring an installation torque ranging from 45 to 50 lbf-ft (61 to 68 Nm). Additionally, the adjustment screw features an internal hex size of 5/32 inches (4 mm), while the locknut requires a hex size of 9/16 inches (15 mm) and torque between 80 to 90 lbf-in (9 to 10 Nm). With a model weight of just .55 lb (.25 kg), this cartridge incorporates Sun's floating style construction, minimizing risks of internal binding due to excessive installation torque or machining variations in cavity/cartridge applications.
The Sun Hydraulics DRCOCDV (DRCOCDV) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or in conjunction with larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 4 surpasses its set value, with port 3 available for use as a work port. The direct-acting design ensures low internal leakage and minimal pilot flow consumption. Both direct-acting and pilot-operated versions of these valves are interchangeable, fitting the same cavities and maintaining identical flow paths. The valve setting is directly influenced by the pressure at port 4, allowing it to modulate between two positions as needed, though it is not bistable. The DRCOCDV has a cavity size of T22A and belongs to Series 2, boasting a capacity of up to 15 gpm (60 L/min). It is factory-set at a pressure established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The maximum allowable leakage at 110 SUS (24 cSt) is limited to 2 in\u00b3/min (30 cc/min). Adjustments can be made through clockwise turns, with up to five full turns available to increase settings. The valve's hex size measures 1-1/8 inches (28.6 mm), requiring an installation torque ranging from 45 to 50 lbf-ft (61 to 68 Nm). Additionally, the adjustment screw features an internal hex size of 5/32 inches (4 mm), while the locknut requires a hex size of 9/16 inches (15 mm) and torque between 80 to 90 lbf-in (9 to 10 Nm). With a model weight of just .55 lb (.25 kg), this cartridge incorporates Sun's floating style construction, minimizing risks of internal binding due to excessive installation torque or machining variations in cavity/cartridge applications.
Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 3 can be used as a work port.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-22A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .55 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-022-006 |
Show FAQ