SUN HYDRAULICS
DRCOCEN
$184.46 USD
- SUN HYDRAULICS
- Material:DRCOCEN
- Model:DRCO-CEN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DRCOCEN (Material Number: DRCOCEN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. It features a configuration where one port is blocked while the other two are open, making it suitable for use as standalone components or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 exceeds its set threshold, with port 3 available for use as a work port. Due to its direct-acting design, this cartridge offers low internal leakage and minimal pilot flow consumption. Notably, the direct-acting and pilot-operated versions of these valves are interchangeable, fitting the same cavities and having identical flow paths. The pressure at port 4 adds directly to the valve's setting, but it is not bistable; it can modulate between two positions. The maximum pressure at port 3 should be limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating limits. This model incorporates Sun Hydraulics' floating style construction to minimize internal part binding caused by excessive installation torque or cavity/cartridge machining variations. It fits into a T-22A cavity and belongs to Series 2 with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), with maximum operating pressure reaching up to 5000 psi (350 bar). Valve leakage is capped at 2 in\u00b3/min (30 cc/min) at an oil viscosity of 110 SUS (24 cSt). The adjustment mechanism includes an internal hex screw requiring specific torque settings for secure installation and operation.
The Sun Hydraulics DRCOCEN (Material Number: DRCOCEN) is a direct-acting, 3-way directional cartridge valve designed for moderate flow circuits. It features a configuration where one port is blocked while the other two are open, making it suitable for use as standalone components or to actuate larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 exceeds its set threshold, with port 3 available for use as a work port. Due to its direct-acting design, this cartridge offers low internal leakage and minimal pilot flow consumption. Notably, the direct-acting and pilot-operated versions of these valves are interchangeable, fitting the same cavities and having identical flow paths. The pressure at port 4 adds directly to the valve's setting, but it is not bistable; it can modulate between two positions. The maximum pressure at port 3 should be limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating limits. This model incorporates Sun Hydraulics' floating style construction to minimize internal part binding caused by excessive installation torque or cavity/cartridge machining variations. It fits into a T-22A cavity and belongs to Series 2 with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), with maximum operating pressure reaching up to 5000 psi (350 bar). Valve leakage is capped at 2 in\u00b3/min (30 cc/min) at an oil viscosity of 110 SUS (24 cSt). The adjustment mechanism includes an internal hex screw requiring specific torque settings for secure installation and operation.
Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 3 can be used as a work port.
- Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-22A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.30 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .55 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-022-006 |
Show FAQ