SUN HYDRAULICS
DTCAZCN212
$772.89 USD
- SUN HYDRAULICS
- Material:DTCAZCN212
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DTCAZCN212 (DTCAZCN212) is a solenoid-operated, 2-way, 2-position cartridge valve designed for direct-acting, poppet-style directional flow control. This valve features an extremely low leakage rate due to its poppet-style construction, effectively preventing fluid passage when pressure changes suddenly\u2014a common issue in other poppet-style valves. It includes a position switch to confirm the non-energized position and is supplied as a sealed, factory-set unit that is not field serviceable. The valve requires a coil for operation and should be installed using a crow's foot wrench due to the position switch's design limitations on wrench access. It is fatigue rated for up to 5000 psi (350 bar) service and does not require minimum hydraulic pressure for operation. The DTCAZCN212 is particularly suitable for load holding applications; it will spring closed in the event of power failure. For models with D or L control, the manual override detent mechanism supports temporary actuation with a mechanical life expectancy of about 7,000 cycles. The valve employs a wet armature design where the working fluid surrounds the armature, potentially affecting performance if the coil remains energized for extended periods. Its high-efficiency solenoid design ensures reliable shifting by maximizing spool actuating force per watt expended. With a cavity size of T-13A, series 1 capacity of 6 gpm (23 L/min), and maximum operating pressure of 5000 psi (350 bar), this valve offers quick response times typically around 50 ms and minimal leakage at maximum conditions. The switching frequency can reach up to 15,000 cycles per hour. Installation requires torque within the range of 30-35 lbf ft (41-47 Nm), and it has a model weight of approximately .50 lb (.25 kg).
The Sun Hydraulics DTCAZCN212 (DTCAZCN212) is a solenoid-operated, 2-way, 2-position cartridge valve designed for direct-acting, poppet-style directional flow control. This valve features an extremely low leakage rate due to its poppet-style construction, effectively preventing fluid passage when pressure changes suddenly\u2014a common issue in other poppet-style valves. It includes a position switch to confirm the non-energized position and is supplied as a sealed, factory-set unit that is not field serviceable. The valve requires a coil for operation and should be installed using a crow's foot wrench due to the position switch's design limitations on wrench access. It is fatigue rated for up to 5000 psi (350 bar) service and does not require minimum hydraulic pressure for operation. The DTCAZCN212 is particularly suitable for load holding applications; it will spring closed in the event of power failure. For models with D or L control, the manual override detent mechanism supports temporary actuation with a mechanical life expectancy of about 7,000 cycles. The valve employs a wet armature design where the working fluid surrounds the armature, potentially affecting performance if the coil remains energized for extended periods. Its high-efficiency solenoid design ensures reliable shifting by maximizing spool actuating force per watt expended. With a cavity size of T-13A, series 1 capacity of 6 gpm (23 L/min), and maximum operating pressure of 5000 psi (350 bar), this valve offers quick response times typically around 50 ms and minimal leakage at maximum conditions. The switching frequency can reach up to 15,000 cycles per hour. Installation requires torque within the range of 30-35 lbf ft (41-47 Nm), and it has a model weight of approximately .50 lb (.25 kg).
This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. Due to the poppet-style construction, this valve has extremely low leakage.
Many poppet style directional valves pass a small amount of fluid when the pressure across them changes suddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this from happening.
The position switch provides confirmation that the valve is in the non-energized position.
- A coil must be ordered with this cartridge. This cartridge is supplied as a sealed, factory set unit and is not field serviceable. If the assembly requires changes or service it needs to be returned to the factory. Any tampering will violate the product warranty.
- Position switch is CE approved.
- When torquing this cartridge into its cavity, a crow's foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This valve is suitable for load holding applications. In the event of power failure, the valve will spring closed.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-413-006 |
Show FAQ