SUN HYDRAULICS
DTCAZCV224
$779.35 USD
- SUN HYDRAULICS
- Material:DTCAZCV224
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DTCAZCV224 (Material Number: DTCAZCV224) is a solenoid-operated, 2-way, 2-position cartridge valve designed for applications requiring precise flow control and minimal leakage. This direct-acting, poppet-style directional valve is engineered to prevent fluid leakage even when there are sudden pressure changes, making it suitable for load holding applications. The valve features a position switch that provides confirmation of its non-energized state and is CE approved. It requires no minimum hydraulic pressure to operate and will spring closed in the event of a power failure, ensuring safety and reliability. This model incorporates a wet armature design, where the working fluid surrounds the armature, allowing exposure to heat generated by the coil. Users should be aware that certain fluids like water-glycol mixtures may degrade over time at high temperatures. The valve's solenoid exhibits high efficiency with significant spool actuating force per watt expended, contributing to reliable operation. The unique floating style construction minimizes binding risks due to installation torque or machining variations. The DTCAZCV224 has a capacity of 6 gpm (23 L/min) and can withstand a maximum operating pressure of 5000 psi (350 bar). Its typical response time is approximately 50 ms, with a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The valve's switching frequency can reach up to 15,000 cycles per hour. Installation requires specific tools like a crow's foot wrench due to the position switch design. With its robust features and efficient design, this cartridge valve is ideal for applications demanding reliable performance under varying conditions. It comes as a sealed unit from the factory and is not field-serviceable; any necessary changes or service must be conducted by returning it to the manufacturer.
The Sun Hydraulics DTCAZCV224 (Material Number: DTCAZCV224) is a solenoid-operated, 2-way, 2-position cartridge valve designed for applications requiring precise flow control and minimal leakage. This direct-acting, poppet-style directional valve is engineered to prevent fluid leakage even when there are sudden pressure changes, making it suitable for load holding applications. The valve features a position switch that provides confirmation of its non-energized state and is CE approved. It requires no minimum hydraulic pressure to operate and will spring closed in the event of a power failure, ensuring safety and reliability. This model incorporates a wet armature design, where the working fluid surrounds the armature, allowing exposure to heat generated by the coil. Users should be aware that certain fluids like water-glycol mixtures may degrade over time at high temperatures. The valve's solenoid exhibits high efficiency with significant spool actuating force per watt expended, contributing to reliable operation. The unique floating style construction minimizes binding risks due to installation torque or machining variations. The DTCAZCV224 has a capacity of 6 gpm (23 L/min) and can withstand a maximum operating pressure of 5000 psi (350 bar). Its typical response time is approximately 50 ms, with a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The valve's switching frequency can reach up to 15,000 cycles per hour. Installation requires specific tools like a crow's foot wrench due to the position switch design. With its robust features and efficient design, this cartridge valve is ideal for applications demanding reliable performance under varying conditions. It comes as a sealed unit from the factory and is not field-serviceable; any necessary changes or service must be conducted by returning it to the manufacturer.
This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. Due to the poppet-style construction, this valve has extremely low leakage.
Many poppet style directional valves pass a small amount of fluid when the pressure across them changes suddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this from happening.
The position switch provides confirmation that the valve is in the non-energized position.
- A coil must be ordered with this cartridge. This cartridge is supplied as a sealed, factory set unit and is not field serviceable. If the assembly requires changes or service it needs to be returned to the factory. Any tampering will violate the product warranty.
- Position switch is CE approved.
- When torquing this cartridge into its cavity, a crow's foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This valve is suitable for load holding applications. In the event of power failure, the valve will spring closed.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-413-006 |
Show FAQ