SUN HYDRAULICS
DTCAZHN223
$793.45 USD
- SUN HYDRAULICS
- Material:DTCAZHN223
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DTCAZHN223 (DTCAZHN223) is a solenoid-operated, 2-way, 2-position cartridge valve designed with a direct-acting, poppet-style mechanism to ensure minimal leakage. This design prevents fluid passage when pressure changes occur suddenly, making it ideal for applications requiring reliable load holding. The valve is equipped with a position switch to confirm its non-energized state and operates without needing minimum hydraulic pressure. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and utilizes a wet armature design that can affect certain fluids over time due to coil-generated heat. The DTCAZHN223 incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations. With a capacity of 6 gpm (23 L/min), it offers a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The valve's maximum leakage rate is limited to 10 drops per minute at 5000 psi (0.7 cc/min at 350 bar). Installation requires specific tools due to the position switch configuration, and any tampering voids the warranty as the unit is factory sealed and not field serviceable. This model's solenoid provides high efficiency by delivering significant spool actuating force per watt expended, ensuring dependable valve shifting performance in various hydraulic systems.
The Sun Hydraulics DTCAZHN223 (DTCAZHN223) is a solenoid-operated, 2-way, 2-position cartridge valve designed with a direct-acting, poppet-style mechanism to ensure minimal leakage. This design prevents fluid passage when pressure changes occur suddenly, making it ideal for applications requiring reliable load holding. The valve is equipped with a position switch to confirm its non-energized state and operates without needing minimum hydraulic pressure. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and utilizes a wet armature design that can affect certain fluids over time due to coil-generated heat. The DTCAZHN223 incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations. With a capacity of 6 gpm (23 L/min), it offers a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The valve's maximum leakage rate is limited to 10 drops per minute at 5000 psi (0.7 cc/min at 350 bar). Installation requires specific tools due to the position switch configuration, and any tampering voids the warranty as the unit is factory sealed and not field serviceable. This model's solenoid provides high efficiency by delivering significant spool actuating force per watt expended, ensuring dependable valve shifting performance in various hydraulic systems.
This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. Due to the poppet-style construction, this valve has extremely low leakage.
Many poppet style directional valves pass a small amount of fluid when the pressure across them changes suddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this from happening.
The position switch provides confirmation that the valve is in the non-energized position.
- A coil must be ordered with this cartridge. This cartridge is supplied as a sealed, factory set unit and is not field serviceable. If the assembly requires changes or service it needs to be returned to the factory. Any tampering will violate the product warranty.
- Position switch is CE approved.
- When torquing this cartridge into its cavity, a crow's foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This valve is suitable for load holding applications. In the event of power failure, the valve will spring closed.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-413-006 |
Show FAQ