SUN HYDRAULICS
FCABLAN

$119.83 USD

SUN HYDRAULICS
Material:FCABLAN
Model:FCAB-LAN
Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FCABLAN (Material Number: FCABLAN) is a fixed orifice, pressure-compensated flow control valve equipped with a reverse flow check for precise flow regulation in meter-in or meter-out applications. This valve is particularly effective in scenarios with wide pressure fluctuations, thanks to its integral high-capacity check valve that ensures unrestricted flow from port 2 to port 1. The user specifies the flow setting, which is then factory-set for optimal performance. It features a sharp-edged orifice design that minimizes variations due to viscosity changes and includes a tunable control option allowing up to 25% variation from the nominal factory preset flow. Adjustments can be made by turning the screw clockwise to increase the flow. All two-port flow control cartridges are interchangeable in terms of their physical and functional attributes, maintaining the same flow path and cavity specifications for a given frame size. However, cartridge extension dimensions may vary from the mounting surface. The Sun floating style construction minimizes internal part binding caused by excessive installation torque or cavity/cartridge machining variations. The valve fits into a T5A cavity and belongs to Series 2, with a maximum operating pressure of 5000 psi (350 bar). It requires an installation torque of between 45-50 lbf ft (61-68 Nm) and features an adjustment screw internal hex size of 5/32 inch (4 mm). The locknut has a hex size of 9/16 inch (15 mm) and should be torqued between 80-90 lbf in (9-10 Nm). Weighing just .50 lb (0.25 kg), it also incorporates Viton seals for enhanced durability and performance.

Description

Fixed-orifice, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. The flow setting is specified by the user and is set at the factory.

Customer must specify a flow rating.
Accurate pressure compensated control requires that a constant pressure differential be maintained across the valve.
The sharp-edged orifice design minimizes flow variations due to viscosity changes.
The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase.
All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Cavity	T-5A
Series	2
Maximum Operating Pressure	5000 psi350 bar
Valve Hex Size	1 1/8 in.28,6 mm
Valve Installation Torque	45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size	5/32 in.4 mm
Locknut Hex Size	9/16 in.15 mm
Locknut Torque	80 - 90 lbf in.9 - 10 Nm
Model Weight	.50 lb0,25 kg
Seal kit - Cartridge	Viton: 990-203-006

Show FAQ

What happens if I block the bypass port on a priority flow control?	The valve acts as a 2 port restrictive flow control.
How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
How accurate are Sun's flow controls?	We claim +/- 10%. We set to +/- 5% in production testing to allow for differences in customers' conditions. If you want accuracy, stay in the bottom 2/3rds of the range. Our 12 gpm (45 L/min.) flow controls are quite flat at 9 gpm (34 L/min.) and dead flat below 6 gpm (23 L/min.), until you get to the bottom of the range. Below about .25 gpm (1 L/min.), spool leakage and orifice conditions start to limit accuracy.
I have a heat problem, will Sun's priority flow control help?	I am afraid not. Unless you are overflowing your current valve and correctly size ours, you are not likely to notice any improvement. Priority flow controls are not efficient devices. They are an easy way to get more than 1 source of oil from 1 pump but they can generate a lot of heat. Try to size your actuators so the pressures are similar on both the priority and the bypass circuits. If you can't do that, try to have the lower flow leg be the lower pressure. The pump pressure is determined by whichever leg is higher and if there is flow that is taking a pressure drop that is not doing work it is creating heat.
What happens if I block the control flow (priority) port?	All flow is blocked, hence the term priority. The priority flow has to be satisfied.
What is the compensating pressure of Sun's flow controls?	The spring force in our flow controls equates to about 100 psi (7 bar). This is high enough to give the valves acceptable capacity (not really) and not too high for proper circuit operation. 100 psi (7 bar) is the spring force; at the upper end of the flow control's range, the drop through the valve will be as high as 250 psi (17 bar) before it starts modulating.
What is the pressure drop through a flow control?	In a meter-in flow control circuit if the pump is set at 3000 psi and the load is 2000 psi the drop through the flow control is 1000 psi. In a meter-out circuit with the load at 2000 psi the drop through the flow control is 2000 psi.

SUN HYDRAULICSFCABLAN

SUN HYDRAULICS
FCABLAN