SUN HYDRAULICS
FCDBKAN
$192.50 USD
- SUN HYDRAULICS
- Material:FCDBKAN
- Model:FCDB-KAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FCDBKAN (FCDBKAN) is a fixed orifice, pressure-compensated flow control valve with a reverse flow check, designed to provide precise flow regulation for meter-in or meter-out applications subject to wide pressure fluctuations. This model incorporates an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. The user specifies the flow setting, which is factory-set and maintains accuracy within 10% of the requested setting. All two-port flow control cartridges are interchangeable in terms of flow path and cavity size, although cartridge extension dimensions may differ. The FCDBKAN features a sharp-edged orifice design that minimizes variations due to changes in fluid viscosity. Additionally, it offers a tunable control option allowing for a 25% variation from the nominal factory preset flow, adjustable by turning the screw clockwise to increase the flow rate. For corrosive environments, corrosion-resistant variants are available with stainless steel or zinc-nickel plated external components. This model uses Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or cavity-cartridge machining variations. The valve has a capacity of 12 gpm (45 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). It requires an installation torque between 45 and 50 lbf ft (61 \u2013 68 Nm). The FCDBKAN fits into a T5A cavity and weighs approximately .50 lb (0.25 kg). It includes an internal hex adjustment screw with a size of 5/32 inch (4 mm), and its locknut requires a torque between 80 and 90 lbf in (9 \u2013 10 Nm). A Viton seal kit is available under part number 990203006 for maintenance needs.
The Sun Hydraulics FCDBKAN (FCDBKAN) is a fixed orifice, pressure-compensated flow control valve with a reverse flow check, designed to provide precise flow regulation for meter-in or meter-out applications subject to wide pressure fluctuations. This model incorporates an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. The user specifies the flow setting, which is factory-set and maintains accuracy within 10% of the requested setting. All two-port flow control cartridges are interchangeable in terms of flow path and cavity size, although cartridge extension dimensions may differ. The FCDBKAN features a sharp-edged orifice design that minimizes variations due to changes in fluid viscosity. Additionally, it offers a tunable control option allowing for a 25% variation from the nominal factory preset flow, adjustable by turning the screw clockwise to increase the flow rate. For corrosive environments, corrosion-resistant variants are available with stainless steel or zinc-nickel plated external components. This model uses Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or cavity-cartridge machining variations. The valve has a capacity of 12 gpm (45 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). It requires an installation torque between 45 and 50 lbf ft (61 \u2013 68 Nm). The FCDBKAN fits into a T5A cavity and weighs approximately .50 lb (0.25 kg). It includes an internal hex adjustment screw with a size of 5/32 inch (4 mm), and its locknut requires a torque between 80 and 90 lbf in (9 \u2013 10 Nm). A Viton seal kit is available under part number 990203006 for maintenance needs.
Fixed-orifice, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. The flow setting is specified by the user and is set at the factory.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ