SUN HYDRAULICS
FCDBXAN
$178.60 USD
- SUN HYDRAULICS
- Material:FCDBXAN
- Model:FCDB-XAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FCDBXAN (Material Number: FCDBXAN) is a fixed orifice, pressure-compensated flow control valve with a reverse flow check. It is designed for precise flow regulation in meter-in or meter-out applications that experience wide pressure fluctuations. This model features an integral high-capacity check valve allowing unrestricted flow from port 2 to port 1. The flow setting is user-specified and factory-set, with ratings accurate within 10% of the requested setting. All 2-port flow control cartridges are interchangeable regarding the flow path and cavity size, although cartridge extension dimensions may vary from the mounting surface. The sharp-edged orifice design minimizes variations due to viscosity changes, and a tunable control option allows for a \u00b125% variation from the nominal factory preset flow. Adjustments can be made by turning the screw clockwise to increase the flow. Designed for corrosive environments, this model can be configured with external stainless steel components (suffix AP) or zinc-nickel plated components (suffix LH). The valve incorporates Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or machining variations. It fits into a T5A cavity and operates at a maximum capacity of 12 gpm (45 L/min) and pressure up to 5000 psi (350 bar). The valve hex size is 1-1/8 inches (28.6 mm), with an installation torque range of 45-50 lbf ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches (4 mm), while the locknut hex size is 9/16 inches (15 mm) with a torque range of 80-90 lbf in (9-10 Nm). The model weighs approximately .50 lb (.25 kg), and Viton seal kits are available under part number 990203006.
The Sun Hydraulics FCDBXAN (Material Number: FCDBXAN) is a fixed orifice, pressure-compensated flow control valve with a reverse flow check. It is designed for precise flow regulation in meter-in or meter-out applications that experience wide pressure fluctuations. This model features an integral high-capacity check valve allowing unrestricted flow from port 2 to port 1. The flow setting is user-specified and factory-set, with ratings accurate within 10% of the requested setting. All 2-port flow control cartridges are interchangeable regarding the flow path and cavity size, although cartridge extension dimensions may vary from the mounting surface. The sharp-edged orifice design minimizes variations due to viscosity changes, and a tunable control option allows for a \u00b125% variation from the nominal factory preset flow. Adjustments can be made by turning the screw clockwise to increase the flow. Designed for corrosive environments, this model can be configured with external stainless steel components (suffix AP) or zinc-nickel plated components (suffix LH). The valve incorporates Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or machining variations. It fits into a T5A cavity and operates at a maximum capacity of 12 gpm (45 L/min) and pressure up to 5000 psi (350 bar). The valve hex size is 1-1/8 inches (28.6 mm), with an installation torque range of 45-50 lbf ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches (4 mm), while the locknut hex size is 9/16 inches (15 mm) with a torque range of 80-90 lbf in (9-10 Nm). The model weighs approximately .50 lb (.25 kg), and Viton seal kits are available under part number 990203006.
Fixed-orifice, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. The flow setting is specified by the user and is set at the factory.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ