SUN HYDRAULICS
FCDBXAV
$185.06 USD
- SUN HYDRAULICS
- Material:FCDBXAV
- Model:FCDB-XAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FCDBXAV (Material Number: FCDBXAV) is a precision-engineered, fixed-orifice, pressure-compensated flow control valve designed for applications requiring consistent flow regulation despite varying pressure conditions. This model features an integral high-capacity check valve that allows unrestricted reverse flow from port 2 to port 1. The user specifies the flow setting, which is factory-set with a precision of within 10% of the requested value. Notably, all two-port flow control cartridges are interchangeable in terms of flow path and cavity compatibility for a given frame size, although cartridge extension dimensions may vary. The FCDBXAV's sharp-edged orifice design effectively minimizes flow variations due to changes in fluid viscosity. Additionally, it offers a tunable control option allowing a 25% variation from the nominal factory preset flow; adjustments can be made by turning the screw clockwise to increase the flow rate. Designed for use in corrosive environments, this model can be configured with corrosion-resistant materials such as stainless steel or zinc-nickel plating. The cartridge incorporates Sun's floating style construction to reduce the risk of internal part binding due to excessive installation torque or machining variations. It fits into a T5A cavity and belongs to series 2, with a capacity of up to 12 gpm (45 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve hex size measures 1-1/8 inches (28.6 mm), requiring an installation torque between 45 and 50 lbf-ft (61-68 Nm). For adjustments, it features an internal hex size of 5/32 inches (4 mm) and locknut hex size of 9/16 inches (15 mm), with locknut torque specifications ranging from 80 to 90 lbf-in (9-10 Nm). The model weighs approximately .50 lb (0.25 kg) and is compatible with Viton seal kits for enhanced durability.
The Sun Hydraulics FCDBXAV (Material Number: FCDBXAV) is a precision-engineered, fixed-orifice, pressure-compensated flow control valve designed for applications requiring consistent flow regulation despite varying pressure conditions. This model features an integral high-capacity check valve that allows unrestricted reverse flow from port 2 to port 1. The user specifies the flow setting, which is factory-set with a precision of within 10% of the requested value. Notably, all two-port flow control cartridges are interchangeable in terms of flow path and cavity compatibility for a given frame size, although cartridge extension dimensions may vary. The FCDBXAV's sharp-edged orifice design effectively minimizes flow variations due to changes in fluid viscosity. Additionally, it offers a tunable control option allowing a 25% variation from the nominal factory preset flow; adjustments can be made by turning the screw clockwise to increase the flow rate. Designed for use in corrosive environments, this model can be configured with corrosion-resistant materials such as stainless steel or zinc-nickel plating. The cartridge incorporates Sun's floating style construction to reduce the risk of internal part binding due to excessive installation torque or machining variations. It fits into a T5A cavity and belongs to series 2, with a capacity of up to 12 gpm (45 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve hex size measures 1-1/8 inches (28.6 mm), requiring an installation torque between 45 and 50 lbf-ft (61-68 Nm). For adjustments, it features an internal hex size of 5/32 inches (4 mm) and locknut hex size of 9/16 inches (15 mm), with locknut torque specifications ranging from 80 to 90 lbf-in (9-10 Nm). The model weighs approximately .50 lb (0.25 kg) and is compatible with Viton seal kits for enhanced durability.
Fixed-orifice, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. The flow setting is specified by the user and is set at the factory.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ