SUN HYDRAULICS
FDBAYAN
$110.30 USD
- SUN HYDRAULICS
- Material:FDBAYAN
- Model:FDBA-YAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FDBAYAN (FDBAYAN) is a fully adjustable, pressure-compensated flow control valve with a reverse-flow check, designed to provide precise flow regulation for meter-in or meter-out applications. This valve is particularly effective in environments where there are wide pressure fluctuations, as it allows for infinite adjustment from nearly closed to maximum flow. The integral high-capacity check valve ensures unrestricted flow from port 2 to port 1. All two-port flow control cartridges from Sun Hydraulics are physically and functionally interchangeable, featuring the same flow path and cavity for a given frame size, although cartridge extension dimensions may vary. The balanced adjustment mechanism facilitates easy adjustments even at high pressures, while the sharp-edged orifice design minimizes flow variations due to viscosity changes. The FDBAYAN model has a minimum leakage rate of 0.1 gpm (0.4 L/min) when the adjustment mechanism is set to the shutoff position. It is compatible with systems using phosphate ester fluids when equipped with EPDM seals; however, exposure to petroleum-based fluids will damage these seals. The cartridge fits into a T-13A cavity and belongs to Series 1 with a capacity of 6 gpm (23 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). The adjustment screw allows for up to five full counterclockwise turns from fully closed to fully open. Installation specifications include a valve hex size of 7/8 inch (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), an internal hex size of 5/32 inch (4 mm) for the adjustment screw, and a locknut hex size of 9/16 inch (15 mm) requiring torque between 80-90 lbf in (9-10 Nm). The model weighs approximately .40 lb (.20 kg).
The Sun Hydraulics FDBAYAN (FDBAYAN) is a fully adjustable, pressure-compensated flow control valve with a reverse-flow check, designed to provide precise flow regulation for meter-in or meter-out applications. This valve is particularly effective in environments where there are wide pressure fluctuations, as it allows for infinite adjustment from nearly closed to maximum flow. The integral high-capacity check valve ensures unrestricted flow from port 2 to port 1. All two-port flow control cartridges from Sun Hydraulics are physically and functionally interchangeable, featuring the same flow path and cavity for a given frame size, although cartridge extension dimensions may vary. The balanced adjustment mechanism facilitates easy adjustments even at high pressures, while the sharp-edged orifice design minimizes flow variations due to viscosity changes. The FDBAYAN model has a minimum leakage rate of 0.1 gpm (0.4 L/min) when the adjustment mechanism is set to the shutoff position. It is compatible with systems using phosphate ester fluids when equipped with EPDM seals; however, exposure to petroleum-based fluids will damage these seals. The cartridge fits into a T-13A cavity and belongs to Series 1 with a capacity of 6 gpm (23 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). The adjustment screw allows for up to five full counterclockwise turns from fully closed to fully open. Installation specifications include a valve hex size of 7/8 inch (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), an internal hex size of 5/32 inch (4 mm) for the adjustment screw, and a locknut hex size of 9/16 inch (15 mm) requiring torque between 80-90 lbf in (9-10 Nm). The model weighs approximately .40 lb (.20 kg).
Fully adjustable, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. They are infinitely adjustable from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- A balanced adjustment mechanism allows for easy adjustment even at high pressures.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- Minimum leakage is .1 gpm (0,4 L/min) when the adjustment mechanism is turned to the shut-off position.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Adjustment - Number of Counterclockwise Turns - Fully Closed to Fully Open | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ