SUN HYDRAULICS
FDCBCAV
$136.51 USD
- SUN HYDRAULICS
- Material:FDCBCAV
- Model:FDCB-CAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FDCBCAV (FDCBCAV) is a fully adjustable, pressure-compensated flow control cartridge designed for precise flow regulation in meter-in or meter-out applications. This cartridge is particularly effective in systems experiencing wide pressure fluctuations, offering infinite adjustability from nearly closed to maximum flow. It features an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. All 2-port flow control cartridges are interchangeable physically and functionally, although extension dimensions may vary. The balanced adjustment mechanism ensures easy adjustment even at high pressures, and the sharp-edged orifice design minimizes flow variations due to viscosity changes. The cartridge boasts minimal leakage of 0.2 gpm when the adjustment mechanism is in the shut-off position. The FDCBCAV is built with a T5A cavity and belongs to Series 2, with a capacity of 12 gpm (45 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve can be adjusted over 5\u00bd counterclockwise turns from fully closed to fully open and requires a valve installation torque of 45-50 lbf ft (61-68 Nm). The internal hex size for the adjustment screw is 5/32 in. (4 mm), while the locknut hex size is 9/16 in. (15 mm) with a torque requirement of 80-90 lbf in. (9-10 Nm). Weighing just .60 lb (.30 kg), this model also offers compatibility with Viton seal kits for use with phosphate ester fluids; however, exposure to petroleum-based fluids will damage these seals. This versatile cartridge is suitable for applications requiring accurate flow control under varying pressures, ensuring consistent performance across different operational conditions.
The Sun Hydraulics FDCBCAV (FDCBCAV) is a fully adjustable, pressure-compensated flow control cartridge designed for precise flow regulation in meter-in or meter-out applications. This cartridge is particularly effective in systems experiencing wide pressure fluctuations, offering infinite adjustability from nearly closed to maximum flow. It features an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. All 2-port flow control cartridges are interchangeable physically and functionally, although extension dimensions may vary. The balanced adjustment mechanism ensures easy adjustment even at high pressures, and the sharp-edged orifice design minimizes flow variations due to viscosity changes. The cartridge boasts minimal leakage of 0.2 gpm when the adjustment mechanism is in the shut-off position. The FDCBCAV is built with a T5A cavity and belongs to Series 2, with a capacity of 12 gpm (45 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve can be adjusted over 5\u00bd counterclockwise turns from fully closed to fully open and requires a valve installation torque of 45-50 lbf ft (61-68 Nm). The internal hex size for the adjustment screw is 5/32 in. (4 mm), while the locknut hex size is 9/16 in. (15 mm) with a torque requirement of 80-90 lbf in. (9-10 Nm). Weighing just .60 lb (.30 kg), this model also offers compatibility with Viton seal kits for use with phosphate ester fluids; however, exposure to petroleum-based fluids will damage these seals. This versatile cartridge is suitable for applications requiring accurate flow control under varying pressures, ensuring consistent performance across different operational conditions.
Fully adjustable, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. They are infinitely adjustable from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- A balanced adjustment mechanism allows for easy adjustment even at high pressures.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- Minimum leakage is .2 gpm (0,8 L/min) when the adjustment mechanism is turned to the shut-off position.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Adjustment - Number of Counterclockwise Turns - Fully Closed to Fully Open | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ