SUN HYDRAULICS
FDCBHBV
$146.44 USD
- SUN HYDRAULICS
- Material:FDCBHBV
- Model:FDCB-HBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FDCBHBV (FDCBHBV) is a fully adjustable, pressure-compensated flow control valve designed for precise flow regulation in both meter-in and meter-out applications. This component is particularly effective in situations where there are wide pressure fluctuations, offering infinite adjustability from nearly closed to maximum flow. It features an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. The design incorporates a sharp-edged orifice to minimize flow variations due to changes in fluid viscosity, ensuring consistent performance. This cartridge is physically and functionally interchangeable with other 2-port flow control cartridges of the same frame size, although the extension dimensions may vary. It includes a balanced adjustment mechanism that facilitates easy adjustments even under high-pressure conditions. The valve can be adjusted through 5.5 counterclockwise turns from fully closed to fully open position, with minimum leakage of .2 gpm when shut off. The FDCBHBV model has a capacity of 12 gpm (45 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). It fits into a T-5A cavity and requires an installation torque of 45-50 lbf ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inch (4 mm), while the locknut hex size is 9/16 inch (15 mm), requiring a torque of 80-90 lbf in (9-10 Nm). Weighing just .60 lb (.30 kg), it is lightweight yet robust. For systems using phosphate ester fluids, cartridges with EPDM seals are recommended as exposure to petroleum-based fluids can damage these seals. This product is ideal for applications requiring accurate flow control across varying pressures, ensuring reliable operation even in demanding conditions.
The Sun Hydraulics FDCBHBV (FDCBHBV) is a fully adjustable, pressure-compensated flow control valve designed for precise flow regulation in both meter-in and meter-out applications. This component is particularly effective in situations where there are wide pressure fluctuations, offering infinite adjustability from nearly closed to maximum flow. It features an integral high-capacity check valve that allows unrestricted flow from port 2 to port 1. The design incorporates a sharp-edged orifice to minimize flow variations due to changes in fluid viscosity, ensuring consistent performance. This cartridge is physically and functionally interchangeable with other 2-port flow control cartridges of the same frame size, although the extension dimensions may vary. It includes a balanced adjustment mechanism that facilitates easy adjustments even under high-pressure conditions. The valve can be adjusted through 5.5 counterclockwise turns from fully closed to fully open position, with minimum leakage of .2 gpm when shut off. The FDCBHBV model has a capacity of 12 gpm (45 L/min) and can operate at a maximum pressure of 5000 psi (350 bar). It fits into a T-5A cavity and requires an installation torque of 45-50 lbf ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inch (4 mm), while the locknut hex size is 9/16 inch (15 mm), requiring a torque of 80-90 lbf in (9-10 Nm). Weighing just .60 lb (.30 kg), it is lightweight yet robust. For systems using phosphate ester fluids, cartridges with EPDM seals are recommended as exposure to petroleum-based fluids can damage these seals. This product is ideal for applications requiring accurate flow control across varying pressures, ensuring reliable operation even in demanding conditions.
Fully adjustable, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. They are infinitely adjustable from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- A balanced adjustment mechanism allows for easy adjustment even at high pressures.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- Minimum leakage is .2 gpm (0,8 L/min) when the adjustment mechanism is turned to the shut-off position.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Adjustment - Number of Counterclockwise Turns - Fully Closed to Fully Open | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ