SUN HYDRAULICS
FPCHEAV2D12A

$578.01 USD

SUN HYDRAULICS
Material:FPCHEAV2D12A
Model:FPCH-EAV@2D12A
Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPCHEAV2D12A (FPCHEAV2D12A) is a normally open, electro-proportional throttle valve that is spring-biased to maintain an open state. When the coil is energized, it generates a closing force on the spool proportional to the command current, counteracted by spring and flow forces. This balance results in a metering orifice whose size adjusts with the current, allowing for precise flow control. The valve exhibits significant self-compensation in the 1 to 2 direction and can provide proportional flow control in the 2 to 1 direction with an external compensator. It supports full reverse flow from 2 to 1 without command under all conditions if a compensator is not used. The valve is available in normally open or closed configurations with three capacity ranges and can operate at pressures up to 5000 psi. It features low leakage levels when closed and interchangeable coils compatible with other Sun solenoid-operated valves. The cartridge offers several manual override options, including no manual override, with specific models having temporary actuation mechanisms meant for approximately 7,000 cycles of mechanical life expectancy. The momentary-twist override option allows operators to shift the valve by twisting the manual override clockwise by 90 degrees. It incorporates Sun's floating style construction to minimize internal parts binding due to excessive installation torque or cavity-cartridge machining variations. For optimal performance, an amplifier with current sensing and adjustable dither between 100-250 Hz should be used. Additional specifications include a T-13A cavity series, capacity of 7 gpm (28 L/min), maximum valve leakage at designated conditions, specific manual override force requirements and stroke length, solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), installation torque range of 30-35 lbf ft (41-47 Nm), model weight with coil of 1.10 lb (0.50 kg), and available Viton seal kits for both cartridge and coil components.

Description

This valve is a normally-open, electro-proportional throttle. The valve is spring biased open. Energizing the coil generates an closing force on the spool proportional to the command current and this force is countered by the spring and flow forces. This force balance creates a metering orifice whose effective size is proportional to the current. The valve exhibits a large degree of self-compensation in the 1 to 2 direction and will provide proportional flow control in the 2 to 1 direction with the addition of an external compensator. Full reverse flow (2 to 1) with no command in the 2 to 1 direction is possible without a compensator under all conditions.

Available in either a normally open or normally closed configuration with three different capacity ranges.
Capable of operating with pressures up to 5000 psi.
Low leakage levels in the closed position.
Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
This cartridge has several manual override choices, including no manual override. See Option Configuration.
For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, E, L and T manual control assemblies have a mechanical life expectancy of approximately 7,000 cycles.
The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Cavity	T-13A
Series	1
Capacity	7 gpm28 L/min.
Maximum Valve Leakage at 110 SUS (24 cSt)	6 in³/min.@3000 psi100 cc/min.@210 bar
Manual Override Force Requirement	5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1
Manual Override Stroke	.10 in.2,5 mm
Solenoid Tube Diameter	.75 in.19 mm
Valve Hex Size	7/8 in.22,2 mm
Valve Installation Torque	30 - 35 lbf ft41 - 47 Nm
Model Weight (with coil)	1.10 lb0,50 kg
Seal kit - Cartridge	Viton: 990-413-006
Seal and nut kit - Coil	Viton: 990-770-006Viton: 990-770-006

Show FAQ

What happens if I block the bypass port on a priority flow control?	The valve acts as a 2 port restrictive flow control.
How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
How accurate are Sun's flow controls?	We claim +/- 10%. We set to +/- 5% in production testing to allow for differences in customers' conditions. If you want accuracy, stay in the bottom 2/3rds of the range. Our 12 gpm (45 L/min.) flow controls are quite flat at 9 gpm (34 L/min.) and dead flat below 6 gpm (23 L/min.), until you get to the bottom of the range. Below about .25 gpm (1 L/min.), spool leakage and orifice conditions start to limit accuracy.
I have a heat problem, will Sun's priority flow control help?	I am afraid not. Unless you are overflowing your current valve and correctly size ours, you are not likely to notice any improvement. Priority flow controls are not efficient devices. They are an easy way to get more than 1 source of oil from 1 pump but they can generate a lot of heat. Try to size your actuators so the pressures are similar on both the priority and the bypass circuits. If you can't do that, try to have the lower flow leg be the lower pressure. The pump pressure is determined by whichever leg is higher and if there is flow that is taking a pressure drop that is not doing work it is creating heat.
What happens if I block the control flow (priority) port?	All flow is blocked, hence the term priority. The priority flow has to be satisfied.
What is the compensating pressure of Sun's flow controls?	The spring force in our flow controls equates to about 100 psi (7 bar). This is high enough to give the valves acceptable capacity (not really) and not too high for proper circuit operation. 100 psi (7 bar) is the spring force; at the upper end of the flow control's range, the drop through the valve will be as high as 250 psi (17 bar) before it starts modulating.
What is the pressure drop through a flow control?	In a meter-in flow control circuit if the pump is set at 3000 psi and the load is 2000 psi the drop through the flow control is 1000 psi. In a meter-out circuit with the load at 2000 psi the drop through the flow control is 2000 psi.

SUN HYDRAULICSFPCHEAV2D12A

SUN HYDRAULICS
FPCHEAV2D12A