SUN HYDRAULICS
FPHKEEV2C12V
$722.86 USD
- SUN HYDRAULICS
- Material:FPHKEEV2C12V
- Model:FPHK-EEV@2C12V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKEEV2C12V (FPHKEEV2C12V) is a sophisticated pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This component is designed to handle pressures up to 5000 psi, making it suitable for high-pressure hydraulic systems. The valve operates by energizing the coil, which generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This allows metered flow from port 1 to port 2 while enabling reverse free flow from port 2 to port 1. The FPHKEEV2C12V features interchangeable coils that can be mounted in either direction on the tube, enhancing its versatility and ease of integration into existing systems. For optimal performance, this valve should be paired with an amplifier that includes current sensing and adjustable dither between 100-250 Hz. It offers several manual override options, including a momentary twist override option (E), allowing manual operation by twisting the override clockwise by 90 degrees. The design incorporates Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. The valve fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). It has a maximum leakage rate of 10 drops/min at 5000 psi and requires a manual override force of 5 lbs at 1000 psi at Port 1. The solenoid tube diameter is .75 inches (19 mm), and it requires an installation torque between 150-160 lbf ft (203-217 Nm). The FPHKEEV2C12V weighs approximately 1.50 lb without the coil and increases to about 2.00 lb with the coil installed. For sealing solutions, Viton seal kits are available for both cartridge and coil configurations.
The Sun Hydraulics FPHKEEV2C12V (FPHKEEV2C12V) is a sophisticated pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This component is designed to handle pressures up to 5000 psi, making it suitable for high-pressure hydraulic systems. The valve operates by energizing the coil, which generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This allows metered flow from port 1 to port 2 while enabling reverse free flow from port 2 to port 1. The FPHKEEV2C12V features interchangeable coils that can be mounted in either direction on the tube, enhancing its versatility and ease of integration into existing systems. For optimal performance, this valve should be paired with an amplifier that includes current sensing and adjustable dither between 100-250 Hz. It offers several manual override options, including a momentary twist override option (E), allowing manual operation by twisting the override clockwise by 90 degrees. The design incorporates Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. The valve fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). It has a maximum leakage rate of 10 drops/min at 5000 psi and requires a manual override force of 5 lbs at 1000 psi at Port 1. The solenoid tube diameter is .75 inches (19 mm), and it requires an installation torque between 150-160 lbf ft (203-217 Nm). The FPHKEEV2C12V weighs approximately 1.50 lb without the coil and increases to about 2.00 lb with the coil installed. For sealing solutions, Viton seal kits are available for both cartridge and coil configurations.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ