SUN HYDRAULICS
FPHKMCN2D24A
$644.93 USD
- SUN HYDRAULICS
- Material:FPHKMCN2D24A
- Model:FPHK-MCN@2D24A
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMCN2D24A (FPHKMCN2D24A) is a pilot-operated, normally closed, electroproportional throttle valve with reverse free flow check capabilities. This valve is engineered to handle pressures up to 5000 psi and is designed for applications requiring precise flow control from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. It features an interchangeable coil system compatible with Sun's other solenoid-operated valves, offering versatile mounting options on the tube in either direction. For enhanced performance, it is recommended to use this valve with an amplifier that includes current sensing and adjustable dither, ideally set between 100-250 Hz. The model incorporates Sun\u2019s floating style construction which helps prevent internal binding due to installation torque or machining variations. The FPHKMCN2D24A cartridge offers several manual override options, including a momentary twist override that allows the operator to shift the valve by rotating the manual override clockwise by 90 degrees. Additionally, depending on circuit requirements, a reverse free flow check bypassing the compensator might be necessary when used with an external compensator. The valve fits into a T16A cavity and belongs to Series 3 with a capacity of handling up to 60 gpm (240 L/min). It has a maximum leakage rate of 10 drops/min at 5000 psi and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. The valve's compact design features a solenoid tube diameter of .75 inches and requires an installation torque between 150-160 lbf-ft. Seal kits are available in Viton material for both cartridge and coil components for reliable sealing performance.
The Sun Hydraulics FPHKMCN2D24A (FPHKMCN2D24A) is a pilot-operated, normally closed, electroproportional throttle valve with reverse free flow check capabilities. This valve is engineered to handle pressures up to 5000 psi and is designed for applications requiring precise flow control from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. It features an interchangeable coil system compatible with Sun's other solenoid-operated valves, offering versatile mounting options on the tube in either direction. For enhanced performance, it is recommended to use this valve with an amplifier that includes current sensing and adjustable dither, ideally set between 100-250 Hz. The model incorporates Sun\u2019s floating style construction which helps prevent internal binding due to installation torque or machining variations. The FPHKMCN2D24A cartridge offers several manual override options, including a momentary twist override that allows the operator to shift the valve by rotating the manual override clockwise by 90 degrees. Additionally, depending on circuit requirements, a reverse free flow check bypassing the compensator might be necessary when used with an external compensator. The valve fits into a T16A cavity and belongs to Series 3 with a capacity of handling up to 60 gpm (240 L/min). It has a maximum leakage rate of 10 drops/min at 5000 psi and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. The valve's compact design features a solenoid tube diameter of .75 inches and requires an installation torque between 150-160 lbf-ft. Seal kits are available in Viton material for both cartridge and coil components for reliable sealing performance.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ