SUN HYDRAULICS
FPHKMCV224
$357.01 USD
- SUN HYDRAULICS
- Material:FPHKMCV224
- Model:FPHK-MCV@224
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMCV224 (FPHKMCV224) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This valve operates by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet, allowing it to open proportionally. It facilitates metered flow from port 1 to port 2 and supports reverse free flow from port 2 to port 1. The valve can handle pressures up to 5000 psi and has a capacity of 60 gallons per minute (240 liters per minute). It incorporates Sun's floating style construction, which reduces the risk of internal parts binding due to excessive installation torque or machining variations. The FPHKMCV224 is compatible with interchangeable coils from Sun's solenoid-operated valves, offering flexibility in coil mounting direction. For optimal performance, an amplifier with current sensing and adjustable dither\u2014ranging between 100 to 250 Hz\u2014is recommended. The valve offers several manual override options, including a momentary twist override that allows operation by twisting the manual override clockwise by 90 degrees. This model fits into a T16A cavity and is part of Series 3. It features a low maximum valve leakage rate of 10 drops per minute at 5000 psi (or approximately 0.7 cc per minute at 350 bar). The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 (33 N/100 bar). With a solenoid tube diameter of .75 inches (19 mm) and a hex size of 1-1/4 inches (31.8 mm), it has an installation torque requirement ranging from 150 to 160 lbf-ft (203 to 217 Nm). The model weighs approximately 1.50 lb without the coil and about 2.00 lb with it installed.
The Sun Hydraulics FPHKMCV224 (FPHKMCV224) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This valve operates by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet, allowing it to open proportionally. It facilitates metered flow from port 1 to port 2 and supports reverse free flow from port 2 to port 1. The valve can handle pressures up to 5000 psi and has a capacity of 60 gallons per minute (240 liters per minute). It incorporates Sun's floating style construction, which reduces the risk of internal parts binding due to excessive installation torque or machining variations. The FPHKMCV224 is compatible with interchangeable coils from Sun's solenoid-operated valves, offering flexibility in coil mounting direction. For optimal performance, an amplifier with current sensing and adjustable dither\u2014ranging between 100 to 250 Hz\u2014is recommended. The valve offers several manual override options, including a momentary twist override that allows operation by twisting the manual override clockwise by 90 degrees. This model fits into a T16A cavity and is part of Series 3. It features a low maximum valve leakage rate of 10 drops per minute at 5000 psi (or approximately 0.7 cc per minute at 350 bar). The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 (33 N/100 bar). With a solenoid tube diameter of .75 inches (19 mm) and a hex size of 1-1/4 inches (31.8 mm), it has an installation torque requirement ranging from 150 to 160 lbf-ft (203 to 217 Nm). The model weighs approximately 1.50 lb without the coil and about 2.00 lb with it installed.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ