SUN HYDRAULICS
FPHKMEN214
$368.92 USD
- SUN HYDRAULICS
- Material:FPHKMEN214
- Model:FPHK-MEN@214
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMEN214 (FPHKMEN214) is a pilot-operated, normally closed electroproportional throttle valve with reverse free flow check capabilities. It operates by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet, allowing proportional opening. This design facilitates metered flow from port 1 to port 2, with reverse free flow from port 2 to port 1. The valve can handle pressures up to 5000 psi and boasts a capacity of 60 gpm (240 L/min). Sun Hydraulics' interchangeable coils can be mounted in either direction on the tube for versatile installation. For optimal performance, use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve features several manual override options, including a momentary-twist option (E) that shifts the valve by twisting the manual override clockwise by 90 degrees. The cartridge's floating style construction minimizes internal binding risks due to excessive installation torque or machining variations. It fits into a T16A cavity and belongs to Series 3 with a recommended dither frequency of 100 Hz. Maximum leakage is minimal at 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). Installation requires a torque of between 150-160 lbf ft (203-217 Nm), and its solenoid tube diameter is .75 inches (19 mm) with a hex size of 1\u00bc inches (31.8 mm). Weighing in at about 1.50 lb without coil and approximately 2 lb with coil, this model ensures reliability in demanding applications requiring precise flow control and pressure management.
The Sun Hydraulics FPHKMEN214 (FPHKMEN214) is a pilot-operated, normally closed electroproportional throttle valve with reverse free flow check capabilities. It operates by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet, allowing proportional opening. This design facilitates metered flow from port 1 to port 2, with reverse free flow from port 2 to port 1. The valve can handle pressures up to 5000 psi and boasts a capacity of 60 gpm (240 L/min). Sun Hydraulics' interchangeable coils can be mounted in either direction on the tube for versatile installation. For optimal performance, use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve features several manual override options, including a momentary-twist option (E) that shifts the valve by twisting the manual override clockwise by 90 degrees. The cartridge's floating style construction minimizes internal binding risks due to excessive installation torque or machining variations. It fits into a T16A cavity and belongs to Series 3 with a recommended dither frequency of 100 Hz. Maximum leakage is minimal at 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). Installation requires a torque of between 150-160 lbf ft (203-217 Nm), and its solenoid tube diameter is .75 inches (19 mm) with a hex size of 1\u00bc inches (31.8 mm). Weighing in at about 1.50 lb without coil and approximately 2 lb with coil, this model ensures reliability in demanding applications requiring precise flow control and pressure management.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ