SUN HYDRAULICS
FPHKMEV2B24A
$658.42 USD
- SUN HYDRAULICS
- Material:FPHKMEV2B24A
- Model:FPHK-MEV@2B24A
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMEV2B24A (Material Number: FPHKMEV2B24A) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This advanced valve is designed to handle pressures up to 5000 psi and offers metered flow from port 1 to port 2, with reverse free flow from port 2 to port 1. The coil can be energized to generate an opening force on the pilot stage, which then vents the main stage poppet for proportional opening. The valve's coils are interchangeable with other full flow, solenoid-operated valves by Sun Hydraulics and can be mounted in either direction on the tube. The FPHKMEV2B24A incorporates Sun's floating style construction to minimize internal parts binding due to excessive installation torque or cavity-cartridge machining variations. It features several manual override options, including a momentary-twist option that allows operation by twisting the manual override clockwise by 90 degrees. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither, ideally between 100-250 Hz. This model fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at specified conditions is minimal at just 10 drops/minute under pressure conditions of up to 5000 psi. The valve requires a manual override force of approximately 5 lbs per 1000 psi at Port 1 and has a nominal deadband as a percentage of input set at approximately 25%. The model weighs around 1.50 lbs without the coil and increases slightly when the coil is included. Additionally, Viton seal kits are available for both cartridge and coil components for maintenance needs.
The Sun Hydraulics FPHKMEV2B24A (Material Number: FPHKMEV2B24A) is a pilot-operated, normally closed, electroproportional throttle valve featuring a reverse free flow check. This advanced valve is designed to handle pressures up to 5000 psi and offers metered flow from port 1 to port 2, with reverse free flow from port 2 to port 1. The coil can be energized to generate an opening force on the pilot stage, which then vents the main stage poppet for proportional opening. The valve's coils are interchangeable with other full flow, solenoid-operated valves by Sun Hydraulics and can be mounted in either direction on the tube. The FPHKMEV2B24A incorporates Sun's floating style construction to minimize internal parts binding due to excessive installation torque or cavity-cartridge machining variations. It features several manual override options, including a momentary-twist option that allows operation by twisting the manual override clockwise by 90 degrees. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither, ideally between 100-250 Hz. This model fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at specified conditions is minimal at just 10 drops/minute under pressure conditions of up to 5000 psi. The valve requires a manual override force of approximately 5 lbs per 1000 psi at Port 1 and has a nominal deadband as a percentage of input set at approximately 25%. The model weighs around 1.50 lbs without the coil and increases slightly when the coil is included. Additionally, Viton seal kits are available for both cartridge and coil components for maintenance needs.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ