SUN HYDRAULICS
FPHKXCV2B24A
$635.60 USD
- SUN HYDRAULICS
- Material:FPHKXCV2B24A
- Model:FPHK-XCV@2B24A
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXCV2B24A (FPHKXCV2B24A) is a pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This valve is designed to manage metered flow from port 1 to port 2 while allowing reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and can handle a flow capacity of up to 60 gpm (240 L/min). The valve features interchangeable coils that are compatible with other full-flow solenoid-operated valves from Sun Hydraulics, allowing for flexible installation on the tube in either direction. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither, ideally set between 100-250 Hz. The FPHKXCV2B24A model includes several manual override options, including the momentary-twist override which allows the operator to shift the valve by twisting the manual override clockwise by 90 degrees. This feature provides additional control flexibility depending on circuit requirements. The cartridge construction incorporates Sun's floating style design, minimizing potential binding issues due to excessive installation torque or variations in cavity machining. With a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar), this valve ensures efficient operation with minimal fluid loss. The installation requires a T16A cavity and a torque setting between 150-160 lbf ft (203-217 Nm). The model weighs approximately 1.50 lb without the coil and around 2.00 lb with it installed. For maintenance, Viton seal kits are available for both the cartridge and coil components. This product is suitable for applications requiring precise control over hydraulic fluid flow under high-pressure conditions while offering robust design features for enhanced reliability and performance adaptability.
The Sun Hydraulics FPHKXCV2B24A (FPHKXCV2B24A) is a pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This valve is designed to manage metered flow from port 1 to port 2 while allowing reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and can handle a flow capacity of up to 60 gpm (240 L/min). The valve features interchangeable coils that are compatible with other full-flow solenoid-operated valves from Sun Hydraulics, allowing for flexible installation on the tube in either direction. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither, ideally set between 100-250 Hz. The FPHKXCV2B24A model includes several manual override options, including the momentary-twist override which allows the operator to shift the valve by twisting the manual override clockwise by 90 degrees. This feature provides additional control flexibility depending on circuit requirements. The cartridge construction incorporates Sun's floating style design, minimizing potential binding issues due to excessive installation torque or variations in cavity machining. With a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar), this valve ensures efficient operation with minimal fluid loss. The installation requires a T16A cavity and a torque setting between 150-160 lbf ft (203-217 Nm). The model weighs approximately 1.50 lb without the coil and around 2.00 lb with it installed. For maintenance, Viton seal kits are available for both the cartridge and coil components. This product is suitable for applications requiring precise control over hydraulic fluid flow under high-pressure conditions while offering robust design features for enhanced reliability and performance adaptability.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ