SUN HYDRAULICS
FPHKXCV912

$356.61 USD

SUN HYDRAULICS
Material:FPHKXCV912
Model:FPHK-XCV@912
Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXCV912 (FPHKXCV912) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check. This valve is designed to operate under pressures up to 5000 psi and can handle a flow capacity of 60 gpm (240 L/min). It features interchangeable coils with other Sun solenoid-operated valves, allowing for flexible installation as the coil can be mounted in either direction on the tube. The valve's design incorporates Sun's floating style construction, which minimizes internal binding due to excessive installation torque or variations in cavity/cartridge machining. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve also offers several manual override options, including a momentary twist override that allows shifting by twisting the manual control clockwise by 90 degrees. The FPHKXCV912 includes a reverse free flow check that may bypass the compensator when used with an external compensator, depending on circuit requirements. Additional specifications include a cavity size of T16A and series number 3. The valve has a nominal deadband of 25% as a percentage of input and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. It features a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque of 150-160 lbf ft (203-217 Nm). The model weighs approximately 1.50 lbs without the coil and 2.00 lbs with it. For maintenance, Viton seal kits are available for both the cartridge and coil components.

Description

This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.

Capable of operating with pressures up to 5000 psi.
Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
This cartridge has several manual override choices, including no manual override. See Option Configuration.
For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Cavity	T-16A
Series	3
Capacity	60 gpm240 L/min.
Recommended dither frequency	100 Hz100 Hz
Maximum Valve Leakage at 110 SUS (24 cSt)	10 drops/min.@5000 psi0,7 cc/min.@350 bar
Manual Override Force Requirement	5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1
Deadband, nominal (as a percentage of input)	25%25%
Manual Override Stroke	.06 in.1,50 mm
Solenoid Tube Diameter	.75 in.19 mm
Valve Hex Size	1 1/4 in.31,8 mm
Valve Installation Torque	150 - 160 lbf ft203 - 217 Nm
Model Weight	1.50 lb0,70 kg
Model Weight (with coil)	2.00 lb2.00 lb
Seal kit - Cartridge	Viton: 990-016-006
Seal and nut kit - Coil	Viton: 990-770-006Viton: 990-770-006

Show FAQ

What happens if I block the bypass port on a priority flow control?	The valve acts as a 2 port restrictive flow control.
How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
How accurate are Sun's flow controls?	We claim +/- 10%. We set to +/- 5% in production testing to allow for differences in customers' conditions. If you want accuracy, stay in the bottom 2/3rds of the range. Our 12 gpm (45 L/min.) flow controls are quite flat at 9 gpm (34 L/min.) and dead flat below 6 gpm (23 L/min.), until you get to the bottom of the range. Below about .25 gpm (1 L/min.), spool leakage and orifice conditions start to limit accuracy.
I have a heat problem, will Sun's priority flow control help?	I am afraid not. Unless you are overflowing your current valve and correctly size ours, you are not likely to notice any improvement. Priority flow controls are not efficient devices. They are an easy way to get more than 1 source of oil from 1 pump but they can generate a lot of heat. Try to size your actuators so the pressures are similar on both the priority and the bypass circuits. If you can't do that, try to have the lower flow leg be the lower pressure. The pump pressure is determined by whichever leg is higher and if there is flow that is taking a pressure drop that is not doing work it is creating heat.
What happens if I block the control flow (priority) port?	All flow is blocked, hence the term priority. The priority flow has to be satisfied.
What is the compensating pressure of Sun's flow controls?	The spring force in our flow controls equates to about 100 psi (7 bar). This is high enough to give the valves acceptable capacity (not really) and not too high for proper circuit operation. 100 psi (7 bar) is the spring force; at the upper end of the flow control's range, the drop through the valve will be as high as 250 psi (17 bar) before it starts modulating.
What is the pressure drop through a flow control?	In a meter-in flow control circuit if the pump is set at 3000 psi and the load is 2000 psi the drop through the flow control is 1000 psi. In a meter-out circuit with the load at 2000 psi the drop through the flow control is 2000 psi.

SUN HYDRAULICSFPHKXCV912

SUN HYDRAULICS
FPHKXCV912