SUN HYDRAULICS
FRDACBV
$103.95 USD
- SUN HYDRAULICS
- Material:FRDACBV
- Model:FRDA-CBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FRDACBV (Material Number: FRDACBV) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage input flow efficiently by directing it to satisfy the priority flow at port 3. If the input flow surpasses the required priority flow, the excess is redirected through port 2 for potential use in a secondary circuit. This model requires customers to specify a flow rating, which is factory set within 10% of the requested setting. It can handle maximum pressures of up to 3000 psi at port 3 and maintain both priority and bypass flows up to system operating pressure levels. The design ensures that priority remains consistent despite variations in input flow, while bypass flow becomes available only after meeting priority requirements. The FRDACBV features a sharp-edged orifice design that minimizes flow variations due to viscosity changes and offers an optional tunable adjustment control for up to a 25% variation from the nominal factory preset flow. This adjustment can be made with three turns of an adjust screw. The valve incorporates Sun's floating style construction, reducing the risk of internal part binding due to excessive installation torque or machining variations in cavities or cartridges. The valve fits into a T2A cavity and belongs to Series 2 with a capacity of 12 gpm (45 L/min) and can handle a maximum operating pressure of 5000 psi (350 bar). It supports a maximum input flow of 30 gpm (120 L/min). The hex size for installation is 1-1/8 inches with an installation torque range between 45-50 lbf\u00b7ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches, and the locknut requires a torque of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .40 lb (.20 kg) and utilizes Viton seal kits for cartridge sealing.
The Sun Hydraulics FRDACBV (Material Number: FRDACBV) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage input flow efficiently by directing it to satisfy the priority flow at port 3. If the input flow surpasses the required priority flow, the excess is redirected through port 2 for potential use in a secondary circuit. This model requires customers to specify a flow rating, which is factory set within 10% of the requested setting. It can handle maximum pressures of up to 3000 psi at port 3 and maintain both priority and bypass flows up to system operating pressure levels. The design ensures that priority remains consistent despite variations in input flow, while bypass flow becomes available only after meeting priority requirements. The FRDACBV features a sharp-edged orifice design that minimizes flow variations due to viscosity changes and offers an optional tunable adjustment control for up to a 25% variation from the nominal factory preset flow. This adjustment can be made with three turns of an adjust screw. The valve incorporates Sun's floating style construction, reducing the risk of internal part binding due to excessive installation torque or machining variations in cavities or cartridges. The valve fits into a T2A cavity and belongs to Series 2 with a capacity of 12 gpm (45 L/min) and can handle a maximum operating pressure of 5000 psi (350 bar). It supports a maximum input flow of 30 gpm (120 L/min). The hex size for installation is 1-1/8 inches with an installation torque range between 45-50 lbf\u00b7ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches, and the locknut requires a torque of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .40 lb (.20 kg) and utilizes Viton seal kits for cartridge sealing.
Bypass/restrictive, fixed-orifice, priority flow controls take an input flow at port 1 and use it to satisfy the priority flow at port 3. If the input flow exceeds the priority flow requirement, the excess is bypassed out port 2. The bypass flow may be used in a secondary circuit.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar).
- Both priority and bypass flow are usable up to the system operating pressure.
- Priority remains relatively constant regardless of variation in input flow.
- Bypass flow is not available until priority flow requirements are satisfied.
- Pressure at the bypass port (port 2) may exceed pressure at the priority port (port 3).
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- A tuneable adjustment control option provides up to +/- 25% variation from the nominal factory pre-set flow. Adjustment is done with +/- 3 turns of the adjust screw. Screw in (CW) to increase flow.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Input Flow | 30 gpm120 L/min. |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ