SUN HYDRAULICS
FRDAXAV
$89.05 USD
- SUN HYDRAULICS
- Material:FRDAXAV
- Model:FRDA-XAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FRDAXAV (Material Number: FRDAXAV) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage hydraulic flow efficiently. This valve takes input flow at port 1 and directs it to satisfy the priority flow requirement at port 3. If the input flow surpasses the priority need, the excess is diverted through port 2 for use in secondary circuits. Users must specify a desired flow rating, which the factory sets with a precision of \u00b110%. The maximum pressure at port 3 is advised to be limited to 3000 psi (210 bar), while both priority and bypass flows can operate up to system pressure levels. Notably, priority flow remains stable despite variations in input flow, while bypass flow only becomes available once the priority demand is met. The pressure at the bypass port (port 2) can exceed that at the priority port (port 3). A sharp-edged orifice design minimizes fluctuations due to viscosity changes, and an adjustable control option allows for up to a 25% variation from the factory preset flow using a three-turn adjustment screw. The valve incorporates Sun's floating style construction to reduce potential binding of internal parts due to excessive installation torque or machining variations in cavity/cartridge construction. This model fits into T-2A cavities and belongs to series 2 with a capacity of 12 gpm (45 L/min). It operates under a maximum pressure of 5000 psi (350 bar) and handles an input flow up to 30 gpm (120 L/min). It requires specific installation torques: valve hex size is 1-1/8 inches (28.6 mm) with an installation torque of 45-50 lbf ft (61-68 Nm), adjustment screw internal hex size is 5/32 inches (4 mm), and locknut hex size is 9/16 inches (15 mm) with a locknut torque of 80-90 lbf in (9-10 Nm). The model weighs approximately .40 lb (.20 kg) and uses Viton seal kits for optimal performance.
The Sun Hydraulics FRDAXAV (Material Number: FRDAXAV) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage hydraulic flow efficiently. This valve takes input flow at port 1 and directs it to satisfy the priority flow requirement at port 3. If the input flow surpasses the priority need, the excess is diverted through port 2 for use in secondary circuits. Users must specify a desired flow rating, which the factory sets with a precision of \u00b110%. The maximum pressure at port 3 is advised to be limited to 3000 psi (210 bar), while both priority and bypass flows can operate up to system pressure levels. Notably, priority flow remains stable despite variations in input flow, while bypass flow only becomes available once the priority demand is met. The pressure at the bypass port (port 2) can exceed that at the priority port (port 3). A sharp-edged orifice design minimizes fluctuations due to viscosity changes, and an adjustable control option allows for up to a 25% variation from the factory preset flow using a three-turn adjustment screw. The valve incorporates Sun's floating style construction to reduce potential binding of internal parts due to excessive installation torque or machining variations in cavity/cartridge construction. This model fits into T-2A cavities and belongs to series 2 with a capacity of 12 gpm (45 L/min). It operates under a maximum pressure of 5000 psi (350 bar) and handles an input flow up to 30 gpm (120 L/min). It requires specific installation torques: valve hex size is 1-1/8 inches (28.6 mm) with an installation torque of 45-50 lbf ft (61-68 Nm), adjustment screw internal hex size is 5/32 inches (4 mm), and locknut hex size is 9/16 inches (15 mm) with a locknut torque of 80-90 lbf in (9-10 Nm). The model weighs approximately .40 lb (.20 kg) and uses Viton seal kits for optimal performance.
Bypass/restrictive, fixed-orifice, priority flow controls take an input flow at port 1 and use it to satisfy the priority flow at port 3. If the input flow exceeds the priority flow requirement, the excess is bypassed out port 2. The bypass flow may be used in a secondary circuit.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar).
- Both priority and bypass flow are usable up to the system operating pressure.
- Priority remains relatively constant regardless of variation in input flow.
- Bypass flow is not available until priority flow requirements are satisfied.
- Pressure at the bypass port (port 2) may exceed pressure at the priority port (port 3).
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- A tuneable adjustment control option provides up to +/- 25% variation from the nominal factory pre-set flow. Adjustment is done with +/- 3 turns of the adjust screw. Screw in (CW) to increase flow.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Input Flow | 30 gpm120 L/min. |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ