SUN HYDRAULICS
FSD

$189.53 USD

SUN HYDRAULICS
Material:FSD
Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FSD (Material Number: FSD) is a subplate designed for hydraulic systems that comply with the ISO 05 interface standard. This product features a body type suited for subplate mounting, with P to T side ports, making it an ideal choice for applications requiring efficient fluid flow management. The subplate is constructed to accommodate four mounting holes with a diameter of 0.44 inches (11.1 mm), allowing for secure installation through the entire depth of the component. It includes open cavities designed to fit T10A cartridges and supports a port size of 3/4 NPTF, ensuring compatibility with various hydraulic setups. This specific model is crafted from 6061 aluminum, known for its excellent corrosion resistance and strength-to-weight ratio, although it is not anodized to maintain cost-effectiveness and avoid potential issues such as increased torque or reduced fatigue life associated with anodizing processes. The use of 6061-T651 aluminum ensures that the manifold can withstand pressures up to 3000 psi (210 bar), suitable for numerous hydraulic applications while maintaining structural integrity under demanding conditions. The FSD subplate's design facilitates easy integration into existing systems, offering reliable performance in directing hydraulic fluid between components. Its robust construction and adherence to international standards make it an essential component for enhancing the efficiency and reliability of hydraulic circuits.

Description

Body Type	SubplateSubplate
Interface	ISO 05ISO 05
Body Features	P to T, side portsP to T, side ports
Mounting Hole Diameter	.44 in.11.1 mm
Mounting Hole Depth	ThroughThrough
Mounting Hole Quantity	44
Open Cavities	11
Cavity	T-10A
Port Size	3/4" NPTF3/4" NPTF

Show FAQ

How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Why does Sun use 6061 aluminum?	6061-T651 is relatively strong, relatively inexpensive, difficult to machine, readily available in all shapes and sizes and very corrosion resistant. 2024 is stronger and machines beautifully, but is expensive and falls to pieces in a corrosive environment.
Why doesn't Sun anodize their aluminum bodies?	Reasons to anodize: To increase corrosion resistance. Sun uses 6061-T651 aluminum. It is one of the most corrosion resistant aluminum alloys there is. Whether or not anodizing improves the corrosion resistance of 6061 aluminum is debatable. We have yet to have a manifold returned because of corrosion. Appearance (color). The 2 colors that would appeal to Sun would be blue or black. Unfortunately these are the colors that are hardest to do consistently. To provide a hard wear surface. Sun does not make parts-in-body valves. The manifold is just plumbing. We don't need a wear surface. Because everyone else does it. Bad reason. Reasons to not anodize: Cost. It's another process. Logistics. When you make tens of thousands of manifolds a month and you anodize hundreds, it's a problem. Consistency. See above. Stamping. After a body is anodized you cannot do any more stamping without making a mess.Inspection. Have you ever tried to look for burrs in a black anodized body? It's the old blackboard factory at night scenario. Torque. You will experience an increase in breakaway torque when removing items from an anodized manifold. Fatigue life. This is the best reason to not anodize. Fatigue failure is a very complex phenomenon. What it takes to initiate a crack is difficult to predict. What it takes to propagate a crack is readily defined. Anodizing produces a very thin, very hard, and very brittle surface on aluminum. The first time you pressurize an anodized aluminum manifold you have initiated fatigue cracks. Whether or not the stress is enough to propagate the cracks is a matter of pressure and manifold geometry. Anodizing an aluminum manifold grossly reduces the fatigue life by anywhere from 20% to 50%.

Additional Resources

Notes:

Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.

SUN HYDRAULICSFSD

Additional Resources

SUN HYDRAULICS
FSD