SUN HYDRAULICS
FXCAXBV
$101.46 USD
- SUN HYDRAULICS
- Material:FXCAXBV
- Model:FXCA-XBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FXCAXBV (Material Number: FXCAXBV) is a fixed orifice, pressure-compensated flow control valve designed for precise flow regulation in applications with significant pressure fluctuations. This model allows for accurate meter-in or meter-out flow control, accommodating user-specified flow settings that are factory calibrated within a 10% range of the requested specifications. Notably, cartridges with EPDM seals are tailored for systems utilizing phosphate ester fluids, as exposure to petroleum-based substances can damage these seals. The sharp-edged orifice design is an integral feature that minimizes flow variations caused by changes in viscosity. Additionally, the valve offers a tunable control option providing a 25% variation from the nominal factory preset flow by adjusting clockwise to increase the setting. The FXCAXBV model is compatible with Sun's T-13A cavity and belongs to Series 1, offering a capacity of up to 6 gpm (23 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve features corrosion-resistant options identified by suffixes AP or LH in the model code for external stainless steel or zinc-nickel plated components, respectively. The design incorporates Sun's floating style construction to reduce potential binding issues due to installation torque or machining variations. Installation specifications include a valve hex size of 7/8 inches (22.2 mm), an installation torque range of 30-35 lbf\u00b7ft (41-47 Nm), an internal hex size adjustment screw of 5/32 inches (4 mm), and a locknut hex size of 9/16 inches (15 mm) with torque requirements of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .30 lb (.15 kg) and supports interchangeability across all two-port flow control cartridges within its frame size.
The Sun Hydraulics FXCAXBV (Material Number: FXCAXBV) is a fixed orifice, pressure-compensated flow control valve designed for precise flow regulation in applications with significant pressure fluctuations. This model allows for accurate meter-in or meter-out flow control, accommodating user-specified flow settings that are factory calibrated within a 10% range of the requested specifications. Notably, cartridges with EPDM seals are tailored for systems utilizing phosphate ester fluids, as exposure to petroleum-based substances can damage these seals. The sharp-edged orifice design is an integral feature that minimizes flow variations caused by changes in viscosity. Additionally, the valve offers a tunable control option providing a 25% variation from the nominal factory preset flow by adjusting clockwise to increase the setting. The FXCAXBV model is compatible with Sun's T-13A cavity and belongs to Series 1, offering a capacity of up to 6 gpm (23 L/min) and a maximum operating pressure of 5000 psi (350 bar). The valve features corrosion-resistant options identified by suffixes AP or LH in the model code for external stainless steel or zinc-nickel plated components, respectively. The design incorporates Sun's floating style construction to reduce potential binding issues due to installation torque or machining variations. Installation specifications include a valve hex size of 7/8 inches (22.2 mm), an installation torque range of 30-35 lbf\u00b7ft (41-47 Nm), an internal hex size adjustment screw of 5/32 inches (4 mm), and a locknut hex size of 9/16 inches (15 mm) with torque requirements of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .30 lb (.15 kg) and supports interchangeability across all two-port flow control cartridges within its frame size.
Fixed-orifice, pressure-compensated flow controls provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. The flow setting is specified by the user and is set at the factory.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .30 lb0,15 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ