SUN HYDRAULICS
HDDADCN223
$198.26 USD
- SUN HYDRAULICS
- Material:HDDADCN223
- Model:HDDA-DCN@223
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDADCN223 (HDDADCN223) is a versatile solenoid-after check cartridge valve, ideal for lift-lower and load-holding applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is designed for fatigue-rated service up to 5000 psi (350 bar) and features a wet armature design, which can influence fluid stability at high temperatures. It offers several manual override options, although these are not compatible with weatherized coils. The cartridge utilizes Sun's floating style construction to minimize internal binding risks due to installation or machining variations. With a capacity of 10 gpm (40 L/min), the valve boasts a response time of approximately 50 ms and has a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). It operates within the T-11A cavity and supports coil interchangeability with other Sun Series 1 solenoids, providing IP69K-rated connector options for enhanced environmental protection. The manual control assembly features a detent mechanism for temporary actuation, offering an estimated mechanical life expectancy of around 7,000 cycles. The HDDADCN223 is suitable for high-frequency switching operations up to 15,000 cycles per hour and requires specific force requirements for manual override operation: approximately 5 lbs/1000 psi at Port 1 (33 N/100 bar). Seal kits are available in Viton material for both cartridge (990011006) and coil (990770006) components.
The Sun Hydraulics HDDADCN223 (HDDADCN223) is a versatile solenoid-after check cartridge valve, ideal for lift-lower and load-holding applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is designed for fatigue-rated service up to 5000 psi (350 bar) and features a wet armature design, which can influence fluid stability at high temperatures. It offers several manual override options, although these are not compatible with weatherized coils. The cartridge utilizes Sun's floating style construction to minimize internal binding risks due to installation or machining variations. With a capacity of 10 gpm (40 L/min), the valve boasts a response time of approximately 50 ms and has a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). It operates within the T-11A cavity and supports coil interchangeability with other Sun Series 1 solenoids, providing IP69K-rated connector options for enhanced environmental protection. The manual control assembly features a detent mechanism for temporary actuation, offering an estimated mechanical life expectancy of around 7,000 cycles. The HDDADCN223 is suitable for high-frequency switching operations up to 15,000 cycles per hour and requires specific force requirements for manual override operation: approximately 5 lbs/1000 psi at Port 1 (33 N/100 bar). Seal kits are available in Viton material for both cartridge (990011006) and coil (990770006) components.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ