SUN HYDRAULICS
HDDADCV2E12V
$382.62 USD
- SUN HYDRAULICS
- Material:HDDADCV2E12V
- Model:HDDA-DCV@2E12V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDADCV2E12V (HDDADCV2E12V) is a solenoid-operated check cartridge valve designed for high-performance hydraulic applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is particularly suitable for lift-lower and load-holding applications, and can be directly integrated into actuators. The valve features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring durability in demanding environments. With multiple manual override options, including configurations without manual override, it provides flexibility in operation; however, note that manual overrides are incompatible with weatherized coils. This cartridge uses a wet armature design, where the working fluid surrounds the armature and may be affected by coil heat over extended periods of use\u2014especially notable with water-glycol mixtures that can degrade and form varnishes impacting valve function. The HDDADCV2E12V employs Sun's floating style construction to minimize internal binding risks caused by excessive torque or machining variations during installation. It has a capacity of 10 gpm (40 L/min) and supports switching frequencies up to 15,000 cycles per hour. The response time is typically around 50 milliseconds. The valve's design includes interchangeable coils compatible with other Sun Series 1 solenoid products, offering various connector options rated up to IP69K for enhanced environmental protection. Installation requires a T-11A cavity and an installation torque between 30\u201335 lbf ft (41\u201347 Nm). For maintenance or replacement needs, Viton seal kits are available for both the cartridge and coil components.
The Sun Hydraulics HDDADCV2E12V (HDDADCV2E12V) is a solenoid-operated check cartridge valve designed for high-performance hydraulic applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is particularly suitable for lift-lower and load-holding applications, and can be directly integrated into actuators. The valve features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring durability in demanding environments. With multiple manual override options, including configurations without manual override, it provides flexibility in operation; however, note that manual overrides are incompatible with weatherized coils. This cartridge uses a wet armature design, where the working fluid surrounds the armature and may be affected by coil heat over extended periods of use\u2014especially notable with water-glycol mixtures that can degrade and form varnishes impacting valve function. The HDDADCV2E12V employs Sun's floating style construction to minimize internal binding risks caused by excessive torque or machining variations during installation. It has a capacity of 10 gpm (40 L/min) and supports switching frequencies up to 15,000 cycles per hour. The response time is typically around 50 milliseconds. The valve's design includes interchangeable coils compatible with other Sun Series 1 solenoid products, offering various connector options rated up to IP69K for enhanced environmental protection. Installation requires a T-11A cavity and an installation torque between 30\u201335 lbf ft (41\u201347 Nm). For maintenance or replacement needs, Viton seal kits are available for both the cartridge and coil components.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ