SUN HYDRAULICS
HDDADCV724N
$187.64 USD
- SUN HYDRAULICS
- Material:HDDADCV724N
- Model:HDDA-DCV@724N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDADCV724N (HDDADCV724N) is a solenoid-after check cartridge hybrid valve designed for lift-lower applications, integrating a direct acting solenoid poppet valve with a check function. The check valve allows flow from inlet port 2 to system port 1, while the deenergized solenoid blocks flow from port 2 to port 3. This versatile valve can be directly integrated into actuators and is suitable for load-holding tasks. It features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar). The manual override options include the D, L, and T control assemblies, each with a mechanical life expectancy of about 7,000 cycles, although these are not compatible with weatherized coils. The valve's wet armature design ensures that the working fluid surrounds the armature, which may expose it to coil-generated heat during prolonged operation. This could affect fluids like water-glycol mixtures by causing varnish formation over time. Notably, coils are interchangeable with other Sun Series 1 solenoid products and come with connector options rated up to IP69K for enhanced environmental protection. The valve employs Sun's floating style construction to reduce internal binding risks. It fits into cavity T11A and belongs to Series 1 with a capacity of 10 gpm (40 L/min), maximum operating pressure of 5000 psi (350 bar), and typical response time of 50 ms. The maximum leakage at 110 SUS (24 cSt) is minimal at just ten drops/minute at full pressure. Additional specifications include a check cracking pressure of 30 psi (2 bar) and switching frequency capability of up to 15,000 cycles per hour.
The Sun Hydraulics HDDADCV724N (HDDADCV724N) is a solenoid-after check cartridge hybrid valve designed for lift-lower applications, integrating a direct acting solenoid poppet valve with a check function. The check valve allows flow from inlet port 2 to system port 1, while the deenergized solenoid blocks flow from port 2 to port 3. This versatile valve can be directly integrated into actuators and is suitable for load-holding tasks. It features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar). The manual override options include the D, L, and T control assemblies, each with a mechanical life expectancy of about 7,000 cycles, although these are not compatible with weatherized coils. The valve's wet armature design ensures that the working fluid surrounds the armature, which may expose it to coil-generated heat during prolonged operation. This could affect fluids like water-glycol mixtures by causing varnish formation over time. Notably, coils are interchangeable with other Sun Series 1 solenoid products and come with connector options rated up to IP69K for enhanced environmental protection. The valve employs Sun's floating style construction to reduce internal binding risks. It fits into cavity T11A and belongs to Series 1 with a capacity of 10 gpm (40 L/min), maximum operating pressure of 5000 psi (350 bar), and typical response time of 50 ms. The maximum leakage at 110 SUS (24 cSt) is minimal at just ten drops/minute at full pressure. Additional specifications include a check cracking pressure of 30 psi (2 bar) and switching frequency capability of up to 15,000 cycles per hour.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ