SUN HYDRAULICS
HDDADCV924N
$192.31 USD
- SUN HYDRAULICS
- Material:HDDADCV924N
- Model:HDDA-DCV@924N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDADCV924N (HDDADCV924N) is a solenoid-after check cartridge valve that combines a direct-acting solenoid poppet valve with a check function, making it ideal for lift-lower applications. The valve allows flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. This hybrid design can be integrated directly into an actuator for efficient load-holding operations. It features a fatigue-rated solenoid tube assembly suitable for up to 5000 psi (350 bar) service and offers several manual override options, though these are not compatible with weatherized coils. The wet armature design enables the working fluid to absorb heat generated by the coil, which could affect performance over prolonged energization periods, especially with certain fluids like water-glycol mixtures. The HDDADCV924N supports interchangeable coils from Sun Series 1 solenoid products and can be mounted in either direction, with coil connector options rated up to IP69K for enhanced environmental protection. It utilizes Sun's floating style construction to minimize internal binding due to installation torque or cavity machining variations. The valve has a capacity of 10 gpm (40 L/min), a maximum operating pressure of 5000 psi (350 bar), and a typical response time of 50 ms. Its maximum leakage at 110 SUS (24 cSt) is limited to 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The product also features a check cracking pressure of 30 psi (2 bar) and allows switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) and has a stroke length of .10 in. (2.5 mm).
The Sun Hydraulics HDDADCV924N (HDDADCV924N) is a solenoid-after check cartridge valve that combines a direct-acting solenoid poppet valve with a check function, making it ideal for lift-lower applications. The valve allows flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. This hybrid design can be integrated directly into an actuator for efficient load-holding operations. It features a fatigue-rated solenoid tube assembly suitable for up to 5000 psi (350 bar) service and offers several manual override options, though these are not compatible with weatherized coils. The wet armature design enables the working fluid to absorb heat generated by the coil, which could affect performance over prolonged energization periods, especially with certain fluids like water-glycol mixtures. The HDDADCV924N supports interchangeable coils from Sun Series 1 solenoid products and can be mounted in either direction, with coil connector options rated up to IP69K for enhanced environmental protection. It utilizes Sun's floating style construction to minimize internal binding due to installation torque or cavity machining variations. The valve has a capacity of 10 gpm (40 L/min), a maximum operating pressure of 5000 psi (350 bar), and a typical response time of 50 ms. Its maximum leakage at 110 SUS (24 cSt) is limited to 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The product also features a check cracking pressure of 30 psi (2 bar) and allows switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) and has a stroke length of .10 in. (2.5 mm).
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ