SUN HYDRAULICS
HDDALCV224N
$184.96 USD
- SUN HYDRAULICS
- Material:HDDALCV224N
- Model:HDDA-LCV@224N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDALCV224N (HDDALCV224N) is a solenoid-operated check cartridge valve designed for versatile hydraulic applications, particularly in lift and lower scenarios. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is suitable for load-holding applications and can be directly integrated into actuators. It features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring reliable performance in demanding environments. The HDDALCV224N offers several manual override options, though it should be noted that manual override functionality is incompatible with weatherized coils. The wet armature design allows the working fluid to surround the armature, which may impact performance if the coil remains energized for extended periods. This is particularly important when using fluids like water-glycol mixtures that can degrade at high temperatures. The valve's construction incorporates Sun's floating style design, minimizing internal part binding due to excessive installation torque or machining variations. It has a capacity of 10 gpm (40 L/min) and features a quick response time of approximately 50 ms. The maximum leakage rate at 110 SUS (24 cSt) is minimal, at only 10 drops per minute under maximum pressure conditions. Interchangeable with other Sun Series 1 solenoid products, the coils can be mounted in either direction and offer connector options with ratings up to IP69K for enhanced environmental protection. With a switching frequency capability of up to 15,000 cycles per hour, this cartridge valve provides robust and efficient control for various hydraulic systems.
The Sun Hydraulics HDDALCV224N (HDDALCV224N) is a solenoid-operated check cartridge valve designed for versatile hydraulic applications, particularly in lift and lower scenarios. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is suitable for load-holding applications and can be directly integrated into actuators. It features a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring reliable performance in demanding environments. The HDDALCV224N offers several manual override options, though it should be noted that manual override functionality is incompatible with weatherized coils. The wet armature design allows the working fluid to surround the armature, which may impact performance if the coil remains energized for extended periods. This is particularly important when using fluids like water-glycol mixtures that can degrade at high temperatures. The valve's construction incorporates Sun's floating style design, minimizing internal part binding due to excessive installation torque or machining variations. It has a capacity of 10 gpm (40 L/min) and features a quick response time of approximately 50 ms. The maximum leakage rate at 110 SUS (24 cSt) is minimal, at only 10 drops per minute under maximum pressure conditions. Interchangeable with other Sun Series 1 solenoid products, the coils can be mounted in either direction and offer connector options with ratings up to IP69K for enhanced environmental protection. With a switching frequency capability of up to 15,000 cycles per hour, this cartridge valve provides robust and efficient control for various hydraulic systems.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ