SUN HYDRAULICS
HDDAMCN212N
$156.17 USD
- SUN HYDRAULICS
- Material:HDDAMCN212N
- Model:HDDA-MCN@212N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCN212N (HDDAMCN212N) is a versatile solenoidafter check cartridge designed for lift-lower applications, integrating a direct-acting solenoid poppet valve with a check function. This hybrid valve allows flow from the inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is deenergized. It is suitable for load-holding applications and can be directly integrated into actuators. The valve's solenoid tube assembly is fatigue-rated for up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This cartridge offers several manual override options, although these are incompatible with weatherized coils. The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles, with detent mechanisms in D or L controls designed for temporary actuation. The wet armature design exposes the armature to working fluid heat, which may affect fluids like water-glycol mixtures over time. Coils are interchangeable within Sun Series 1 products and can be mounted in either direction, with connector options rated up to IP69K for environmental protection. The HDDAMCN212N features Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. It fits into a T11A cavity and has a capacity of 10 gpm (40 L/min). The maximum operating pressure is 5000 psi (350 bar), with a typical response time of 50 ms and maximum leakage at specified conditions being 10 drops/min (0.7 cc/min). The check cracking pressure is set at 30 psi (2 bar), and it supports high switching frequencies up to 15,000 cycles per hour. This robust design makes it ideal for demanding hydraulic systems requiring reliable performance and flexibility in configuration.
The Sun Hydraulics HDDAMCN212N (HDDAMCN212N) is a versatile solenoidafter check cartridge designed for lift-lower applications, integrating a direct-acting solenoid poppet valve with a check function. This hybrid valve allows flow from the inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is deenergized. It is suitable for load-holding applications and can be directly integrated into actuators. The valve's solenoid tube assembly is fatigue-rated for up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This cartridge offers several manual override options, although these are incompatible with weatherized coils. The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles, with detent mechanisms in D or L controls designed for temporary actuation. The wet armature design exposes the armature to working fluid heat, which may affect fluids like water-glycol mixtures over time. Coils are interchangeable within Sun Series 1 products and can be mounted in either direction, with connector options rated up to IP69K for environmental protection. The HDDAMCN212N features Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. It fits into a T11A cavity and has a capacity of 10 gpm (40 L/min). The maximum operating pressure is 5000 psi (350 bar), with a typical response time of 50 ms and maximum leakage at specified conditions being 10 drops/min (0.7 cc/min). The check cracking pressure is set at 30 psi (2 bar), and it supports high switching frequencies up to 15,000 cycles per hour. This robust design makes it ideal for demanding hydraulic systems requiring reliable performance and flexibility in configuration.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ