SUN HYDRAULICS
HDDAMCN4E24V
$338.65 USD
- SUN HYDRAULICS
- Material:HDDAMCN4E24V
- Model:HDDA-MCN@4E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCN4E24V (HDDAMCN4E24V) is a solenoid-after check cartridge designed as a hybrid valve, integrating a direct-acting solenoid poppet valve after the check function. It facilitates flow from inlet port 2 to system port 1, with the solenoid de-energized to block flow from port 2 to port 3. This combination valve is ideal for lift-lower applications and can be directly integrated into actuators. The solenoid tube assembly is rated for fatigue at up to 5000 psi (350 bar), ensuring durability in demanding environments. The cartridge offers several manual override options, with the D or L control equipped with a detent mechanism for temporary actuation and a mechanical life expectancy of approximately 7,000 cycles. It is suitable for load-holding applications and features a wet armature design, where the working fluid surrounds the armature and absorbs heat generated by the coil. This design consideration is critical when using fluids like water-glycol mixtures that may degrade over time due to heat exposure. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube, offering flexibility in installation. The valve incorporates Sun's floating style construction to minimize internal parts binding due to excessive torque or machining variations in cavity-cartridge installations. Additional features include coil connector options with ratings up to IP69K for enhanced environmental protection. The HDDAMCN4E24V fits into cavity T-11A, supports a capacity of 10 gpm (40 L/min), and has specific capabilities such as response time of approximately 50 ms and maximum leakage at designated conditions of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar).
The Sun Hydraulics HDDAMCN4E24V (HDDAMCN4E24V) is a solenoid-after check cartridge designed as a hybrid valve, integrating a direct-acting solenoid poppet valve after the check function. It facilitates flow from inlet port 2 to system port 1, with the solenoid de-energized to block flow from port 2 to port 3. This combination valve is ideal for lift-lower applications and can be directly integrated into actuators. The solenoid tube assembly is rated for fatigue at up to 5000 psi (350 bar), ensuring durability in demanding environments. The cartridge offers several manual override options, with the D or L control equipped with a detent mechanism for temporary actuation and a mechanical life expectancy of approximately 7,000 cycles. It is suitable for load-holding applications and features a wet armature design, where the working fluid surrounds the armature and absorbs heat generated by the coil. This design consideration is critical when using fluids like water-glycol mixtures that may degrade over time due to heat exposure. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube, offering flexibility in installation. The valve incorporates Sun's floating style construction to minimize internal parts binding due to excessive torque or machining variations in cavity-cartridge installations. Additional features include coil connector options with ratings up to IP69K for enhanced environmental protection. The HDDAMCN4E24V fits into cavity T-11A, supports a capacity of 10 gpm (40 L/min), and has specific capabilities such as response time of approximately 50 ms and maximum leakage at designated conditions of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar).
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ