SUN HYDRAULICS
HDDAMCN512
$159.44 USD
- SUN HYDRAULICS
- Material:HDDAMCN512
- Model:HDDA-MCN@512
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCN512 (HDDAMCN512) is a solenoid-after check cartridge valve designed for hybrid applications, combining a direct-acting solenoid poppet valve with a check function. This valve facilitates fluid flow from inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is particularly suited for lift-lower and load-holding applications and can be integrated directly into actuators. The valve\u2019s solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability under demanding conditions. The manual override feature, available in D, L, and T control options, allows temporary actuation with an approximate mechanical life expectancy of 7,000 cycles; however, it is not compatible with weatherized coils. The HDDAMCN512 employs a wet armature design that exposes the working fluid to the heat generated by the coil, which may affect certain fluids like water-glycol mixtures over time. Coils are interchangeable with Sun Series 1 solenoids and can be mounted in either direction. Additionally, coil connector options offer protection ratings up to IP69K for enhanced environmental resistance. This cartridge valve features Sun's floating style construction to reduce the risk of internal binding due to installation torque or machining variations. It fits into a T11A cavity and has a flow capacity of 10 gpm (40 L/min). The response time is typically around 50 ms, with maximum leakage at 110 SUS being limited to 10 drops/min at 5000 psi. The check cracking pressure is set at 30 psi (2 bar), and it supports switching frequencies up to 15,000 cycles/hr. The manual override requires a force of approximately 5 lbs per 1000 psi on Port 1, with a stroke length of .10 in (2.5 mm).
The Sun Hydraulics HDDAMCN512 (HDDAMCN512) is a solenoid-after check cartridge valve designed for hybrid applications, combining a direct-acting solenoid poppet valve with a check function. This valve facilitates fluid flow from inlet port 2 to system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. It is particularly suited for lift-lower and load-holding applications and can be integrated directly into actuators. The valve\u2019s solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability under demanding conditions. The manual override feature, available in D, L, and T control options, allows temporary actuation with an approximate mechanical life expectancy of 7,000 cycles; however, it is not compatible with weatherized coils. The HDDAMCN512 employs a wet armature design that exposes the working fluid to the heat generated by the coil, which may affect certain fluids like water-glycol mixtures over time. Coils are interchangeable with Sun Series 1 solenoids and can be mounted in either direction. Additionally, coil connector options offer protection ratings up to IP69K for enhanced environmental resistance. This cartridge valve features Sun's floating style construction to reduce the risk of internal binding due to installation torque or machining variations. It fits into a T11A cavity and has a flow capacity of 10 gpm (40 L/min). The response time is typically around 50 ms, with maximum leakage at 110 SUS being limited to 10 drops/min at 5000 psi. The check cracking pressure is set at 30 psi (2 bar), and it supports switching frequencies up to 15,000 cycles/hr. The manual override requires a force of approximately 5 lbs per 1000 psi on Port 1, with a stroke length of .10 in (2.5 mm).
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ