SUN HYDRAULICS
HDDAMCV214N
$167.68 USD
- SUN HYDRAULICS
- Material:HDDAMCV214N
- Model:HDDA-MCV@214N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCV214N (HDDAMCV214N) is a versatile solenoid-after-check cartridge valve designed for effective load holding and lift/lower applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is fatigue-rated for service pressures up to 5000 psi (350 bar), making it suitable for demanding hydraulic systems. It features a wet armature design, which helps manage heat generated by the coil but may lead to fluid breakdown in water-glycol mixtures over time. The HDDAMCV214N offers several manual override options, although these are not compatible with weatherized coils. It incorporates Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. The valve's cavity is T11A, and it belongs to Series 1 with a capacity of up to 10 gpm (40 L/min). It boasts a response time of approximately 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The manual override requires a force of about 5 lbs at 1000 psi and has a stroke of .10 inches (2.5 mm). Coil connectors are available with ratings up to IP69K for enhanced environmental protection, and coils can be interchanged with other Sun Series 1 solenoid products. This product ensures reliable performance in hydraulic circuits requiring precise control and robust operation under high-pressure conditions.
The Sun Hydraulics HDDAMCV214N (HDDAMCV214N) is a versatile solenoid-after-check cartridge valve designed for effective load holding and lift/lower applications. This hybrid valve integrates a direct-acting solenoid poppet valve with a check function, allowing flow from the inlet port 2 to the system port 1, while blocking flow from port 2 to port 3 when the solenoid is de-energized. The valve is fatigue-rated for service pressures up to 5000 psi (350 bar), making it suitable for demanding hydraulic systems. It features a wet armature design, which helps manage heat generated by the coil but may lead to fluid breakdown in water-glycol mixtures over time. The HDDAMCV214N offers several manual override options, although these are not compatible with weatherized coils. It incorporates Sun's floating style construction to minimize internal part binding due to installation torque or machining variations. The valve's cavity is T11A, and it belongs to Series 1 with a capacity of up to 10 gpm (40 L/min). It boasts a response time of approximately 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The manual override requires a force of about 5 lbs at 1000 psi and has a stroke of .10 inches (2.5 mm). Coil connectors are available with ratings up to IP69K for enhanced environmental protection, and coils can be interchanged with other Sun Series 1 solenoid products. This product ensures reliable performance in hydraulic circuits requiring precise control and robust operation under high-pressure conditions.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ