SUN HYDRAULICS
HDDAMCV2E12V
$361.77 USD
- SUN HYDRAULICS
- Material:HDDAMCV2E12V
- Model:HDDA-MCV@2E12V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCV2E12V (HDDAMCV2E12V) is a versatile solenoid-after check cartridge valve designed for lift-lower applications, integrating seamlessly into actuators. This hybrid valve combines a direct-acting solenoid poppet valve with a check valve function, allowing flow from inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is de-energized. The solenoid tube assembly is robust, fatigue-rated for up to 5000 psi (350 bar), and features a wet armature design that permits the working fluid to surround the armature, potentially impacting performance if the coil is energized for extended periods. The HDDAMCV2E12V offers multiple manual override options, although these are incompatible with weatherized coils. The cartridge's mechanical life expectancy reaches approximately 7,000 cycles with specific control models. It incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. With a cavity T11A and Series 1 designation, this valve has a capacity of up to 10 gpm (40 L/min) and operates at maximum pressures of 5000 psi (350 bar). Its typical response time is around 50 ms, with maximum leakage at specified conditions limited to 10 drops/minute or approximately 0.7 cc/minute at full pressure. The check cracking pressure stands at 30 psi (2 bar), while it supports switching frequencies up to 15,000 cycles per hour. For installation, it requires a torque of between 30 and 35 lbf ft (41 - 47 Nm). This product also includes interchangeable coil options compatible with other Sun Series 1 solenoid products and offers coil connector ratings up to IP69K for enhanced environmental protection.
The Sun Hydraulics HDDAMCV2E12V (HDDAMCV2E12V) is a versatile solenoid-after check cartridge valve designed for lift-lower applications, integrating seamlessly into actuators. This hybrid valve combines a direct-acting solenoid poppet valve with a check valve function, allowing flow from inlet port 2 to system port 1 while blocking flow from port 2 to port 3 when the solenoid is de-energized. The solenoid tube assembly is robust, fatigue-rated for up to 5000 psi (350 bar), and features a wet armature design that permits the working fluid to surround the armature, potentially impacting performance if the coil is energized for extended periods. The HDDAMCV2E12V offers multiple manual override options, although these are incompatible with weatherized coils. The cartridge's mechanical life expectancy reaches approximately 7,000 cycles with specific control models. It incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. With a cavity T11A and Series 1 designation, this valve has a capacity of up to 10 gpm (40 L/min) and operates at maximum pressures of 5000 psi (350 bar). Its typical response time is around 50 ms, with maximum leakage at specified conditions limited to 10 drops/minute or approximately 0.7 cc/minute at full pressure. The check cracking pressure stands at 30 psi (2 bar), while it supports switching frequencies up to 15,000 cycles per hour. For installation, it requires a torque of between 30 and 35 lbf ft (41 - 47 Nm). This product also includes interchangeable coil options compatible with other Sun Series 1 solenoid products and offers coil connector ratings up to IP69K for enhanced environmental protection.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ